Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface

REN Zhifeng; LI Yuanzhi; WU Jianjun; WANG Bingjian; LU Zhongliang

Safety in Coal Mines > 2021 > 52(7): 170-174.

REN Zhifeng, LI Yuanzhi, WU Jianjun, WANG Bingjian, LU Zhongliang. Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface[J]. Safety in Coal Mines, 2021, 52(7): 170-174.

Citation:

PDF (2479 KB)

Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface

More Information

Published Date: July 19, 2021

Graphical Abstract

Abstract

Abstract

The operating environment is polluted so seriously by shearer-generated dust that the shearer operators are one of most susceptible workers of coal pneumoconiosis in the mechanized coal mining workface of underground coal mines. In this work, we take 2214 mechanized coal mining workface of Liujialiang Coalmine in Xuangang Coal and Power Company Limited of Jinneng Holding Equipment Manufacturing Group as an example, and study the migration law of shearer-generated dust by numerical simulation. The results indicate that the falling height of the dust produced by the front cutting drum is more than that by the back one of the dual drum coal mining machine. The influence of equipment layout and strong turbulent air flow on the migration of coal dust produced by the front cutting drum is so great that they are quickly transported horizontally to the working area of the shearer operators, especially pathogenic dust below 5 μm, which is an important factor that causes the shearer operators to suffer from pneumoconiosis easily. The numerical simulation results are consistent with the field measurement of workface 2214.
- shearer-generated dust,
- shearer operator,
- dust migration,
- pulvation airflow,
- pneumoconiosis

FullText(HTML)

References (19)

References

[1]	孟雨.浅谈我国职业病防治存在的问题及对策[J].卫生软科学，2011，25（9）：589-592. MENG Yu. Discuss on the problems and countermeasures of occupational disease prevention in China[J]. Soft Science of Health, 2011, 25（9）: 589-592.
[2]	李强，蒋承林，翟果红.我国煤炭行业尘肺病现状分析及防治对策[J].中国安全生产科学技术，2011，7（4）：148-151. LI Qiang, JIANG Chenglin, ZHAI Guohong. Analysis and countermeasures on the situation of coal industry pneumoconiosis in China[J]. Journal of Safety Science and Technology, 2011, 7（4）: 148-151.
[3]	王兵建，李远知.教学三矿机采面割煤产尘运移与控制技术[J].煤矿安全，2018，49（3）：68-71. WANG Bingjian, LI Yuanzhi. Migration and control technology of shearer-generated dust in mechanized coal mining working face of Jiaoxue No.3 Coalmine[J]. Safety in Coal Mines, 2018, 49（3）: 68-71.
[4]	Lu Zhongliang, Ren Jingzhang, Wang Hongli. Numerical simulation and trumpet optimization of the inside inhaling and outside pressing dust collector[J]. AIP ADVANCES, 2020, 10（6）: 065138.1-065138.6
[5]	时训先，蒋仲安，周姝嫣，等.综采工作面粉尘分布规律的实验研究[J].煤炭学报，2008，33（10）：1117. SHI Xunxian, JIANG Zhong’an, ZHOU Shuyan, et al. Experimental study on dust distribution regularity of fully mechanized mining face[J]. Journal of China Coal Society, 2008, 33（10）: 1117.
[6]	周刚，张琦，白若男，等.大采高综采面风流-呼尘耦合运移规律CFD数值模拟[J].中国矿业大学学报，2016，45（4）：684-693. ZHOU Gang, ZHANG Qi, BAI Ruonan, et al. CFD simulation of air-respirable dust coupling migration law at fully mechanized mining face with large mining height[J]. Journal of China University of Mining & Technology, 2016, 45（4）: 684-693.
[7]	Ting Ren, Zhongwei Wang, Graeme Cooper. CFD modelling of ventilation and dust flow behaviour above an underground bin and the design of an innovative dust mitigation system[J]. Tunnelling and Underground Space Technology, 2014, 41: 241-254.
[8]	韩占忠，王敬，兰小平，等.流体工程仿真计算实例与应用[M].北京：北京理工大学出版社，2008.
[9]	孙一坚，沈恒根.工业通风[M].北京：中国建筑工业出版社，2010.
[10]	李万平.计算流体力学[M].武汉：华中科技大学出版社，2004.
[11]	谢伟松,陶建华.三维水动力学模型高精度差分格式和解法研究[J].天津大学学报，2003（5）：590-594. XIE Weisong, TAO Jianhua. Study of high accuracy difference scheme and solution methodof a 3-D hydrodynamic model[J]. Journal of Tianjin University（Science and Technology）, 2003（5）: 590-594.
[12]	王晓玲.精馏塔板上流体三维流场及传质的模拟[D].天津：天津大学，2003.
[13]	许晓平，周洲.多面体网格在CFD中的应用[J].飞行力学，2009，27（6）：87. XU Xiaoping, ZHOU Zhou. Application of polyhedral mesh in CFD[J]. Flight Dynamics, 2009, 27（6）: 87.
[14]	左前明，崔向飞，朱良，等．大采高综采工作面风流流动规律数值模拟分析[J]．煤炭技术，2015，34（6）：169-171. ZUO Qianming, CUI Xiangfei, ZHU Liang, et al. Numerical simulation analysis of airflow distribution law in large mining height fully-mechanized face[J]. Coal Technology. 2015,34（6）: 169-171.
[15]	杨明东.综采面偏W型通风系统瓦斯运移规律研究[D].淮南：安徽理工大学，2014.
[16]	刘启海，林玉池，于连生.基于改进R-R分布的现场激光粒度仪反演算法[J].光电工程，2009，36（6）：68-71. LIU Qihai, LIN Yuchi, YU Liansheng. Inversion algorithm of field laser particle size analyzer based on improved R-R distribution[J]. Opto-Electronic Engineering, 2009, 36（6）: 68-71.
[17]	Alderliesten M. Mean particle diameters. part VII. the rosin-rammler size distribution: physical and mathematical properties and relationships to moment-ratio defined mean particle diameters[J]. Particle & Particle Systems Characterization, 2013, 30（3）: 244-257.
[18]	赵振保.采煤机截割粉尘扩散运移规律的试验研究[J].北京理工大学学报，2011，31（4）：383-386. ZHAO Zhenbao. Experimental research on diffusion and mitigation law of dust cut generated by coal shearer[J]. Transactions of Beijing Institute of Technology, 2011, 31（4）: 383-386.
[19]	李晓豁.截割粉尘成因与控制方法研究[D].徐州：中国矿业大学出版社，2003.

[1]	WANG Lei. Status and Countermeasure of Safety Technology of Inclined-Shaft Man Car of Coal Mine[J]. Safety in Coal Mines, 2020, 51(11): 146-149.
[2]	SUN Debiao, ZHENG Yi, YANG Ailan, QIU Deyi, CHEN Yong. Design of a New Anti-car-running Barrier in Underground Coal Mine[J]. Safety in Coal Mines, 2020, 51(9): 140-143.
[3]	ZHANG Su, WANG Ruoxuan, LI Rongrong, GU Haini. Causes of Derailing Accidents of Inclined Shaft Trip Lifting in Coal Mine Based on Behavioral Safety[J]. Safety in Coal Mines, 2018, 49(11): 245-248.
[4]	LIU Jie. Safety Protection Emphasis and Countermeasures of TBM Method in Inclined Shaft Construction of Coal Mine[J]. Safety in Coal Mines, 2017, 48(s1): 128-132.
[5]	JIANG Sunlun, YAO Shanhua, REN Mingyuan. Monitoring System for Protective Device of Inclined Shaft Runaway Car in Coal Mine[J]. Safety in Coal Mines, 2016, 47(9): 117-119.
[6]	ZHOU Meng-ying, LIANG Guo-zhi. Personal Protection Technology in High Temperature Mine[J]. Safety in Coal Mines, 2013, 44(12): 82-84.
[7]	ZHANG Guo-qing. Test Method for S7-300 PLC Control Protection of Mine Hoist[J]. Safety in Coal Mines, 2013, 44(5): 123-124,125.
[8]	HUANG He-song, FAN Shi-shuai, WANG Gong-hua, CHEN Dian-xing. System Reconstruction of Main Shaft Loading Equipment in Dongtan Coal Mine Based on PLC and WinCC[J]. Safety in Coal Mines, 2012, 43(10): 119-121,122.
[9]	ZONG Jian-kang, JIN Guo-rong. A Buried Type Gear Driven Underground Car Column Block and Its Reverse Collision Protection[J]. Safety in Coal Mines, 2012, 43(9): 118-120.
[10]	REN Nan. Coal Mine Beam Tube Monitoring System Based on S7-200PLC[J]. Safety in Coal Mines, 2012, 43(6): 64-66.

Cited By

Get Citation

PDF

XML

Article views (33) PDF downloads (22)

Turn off MathJax

Article Contents

Abstract

References

Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface

Abstract

References

Related Articles

Catalog

Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface

Abstract

References

Related Articles

Catalog

Export File

Citation

Format

Content