• 中文核心期刊
  • 中国科技核心期刊
  • RCCSE中国核心学术期刊

基于倾角补偿的矿用煤柱应力计

王东

王东. 基于倾角补偿的矿用煤柱应力计[J]. 煤矿安全, 2016, 47(2): 109-112.
引用本文: 王东. 基于倾角补偿的矿用煤柱应力计[J]. 煤矿安全, 2016, 47(2): 109-112.
WANG Dong. Mine-used Coal Pillar Stress Meter Based on Dip Angle Compensation[J]. Safety in Coal Mines, 2016, 47(2): 109-112.
Citation: WANG Dong. Mine-used Coal Pillar Stress Meter Based on Dip Angle Compensation[J]. Safety in Coal Mines, 2016, 47(2): 109-112.

基于倾角补偿的矿用煤柱应力计

Mine-used Coal Pillar Stress Meter Based on Dip Angle Compensation

  • 摘要: 在对煤柱应力计传感器现状研究的基础上,基于倾角补偿对矿用二维煤柱应力计进行了研究。在电阻应变片应变式传感器内后置三轴加速度传感器,监测煤柱应力计在煤柱钻孔内的物理位置,测算水平、垂直方向分量,得到二维煤柱应力;采用LMP90100作为煤柱应力信号调理芯片,CC2530最小系统作为主处理器,CC2591作为射频前端放大器,将二维煤柱应力信号进行数码管显示,并针对矿井巷道狭长特征,采用RS485和无线传输方式进行通讯。
    Abstract: Based on the analysis of the status of the coal pillar stress sensor, the two dimensional coal pillar stress meter based on dip angle compensation was studied. The three axis acceleration sensor posited on the stress sensor of the electric resistance strain gauge, the physical location of coal pillar borehole of the coal pillar stress was monitored. The vertical direction and horizontal direction were calculated. The two dimensional coal pillar stress was obtained. LMP90100 was used as the pillar stress signal conditioning chip. CC2530 minimum system was used as the main processor. CC2591 was used as the RF front-end amplifier. The two dimensional coal pillar sign was displayed by digital tube. According to the characteristics of the mine roadway, the communication mode is RS485 and wireless transmission.
  • [1] 于正兴,姜福兴,王洛锋.提高钻孔应力计监测煤岩应力的精度试验[J].煤炭科学技术,2010, 38(11):53.
    [2] 赵明.矿用采动应力监测传感器的比较和应用[J].煤矿机电,2012(6):98-101.
    [3] 宋维尧,张正凯.KS-1型钻孔应力计的原理及其应用[J].煤炭科学技术,1990(5):12-16.
    [4] 徐晓寒,徐文全.新型钻孔应力计研制及现场应用[J].陕西煤炭,2012(2):77-79.
    [5] 李安静.平朔井工三矿区段煤柱宽度优化研究[J].煤炭科学技术,2012,40(4):45-48.
    [6] 王德璋,李俊杰.动压巷道矿压显现规律及支护技术[J].煤炭科学技术,2011,39(4):40-43.
    [7] 李忠华,官福海.弹塑性煤柱的应力场计算[J].采矿与安全工程学报,2006(1):35-37.
    [8] 王永秀,齐庆新,陈兵,等.煤柱应力分布规律的数值模拟分析[J].煤炭科学技术,2004(10):65-68.
  • 期刊类型引用(6)

    1. 张健. 坚硬顶板切顶合理参数模拟研究. 山西冶金. 2024(01): 115-116+119 . 百度学术
    2. 刘坤,滕腾,杨耀辉,李梓昊,丁鹤. 不同采高下深部煤层覆岩应力场与塑性区演化数值模拟研究. 采矿技术. 2024(04): 41-45 . 百度学术
    3. 宋士康,REN Ting,冯海龙,窦林名,孙炳清,张涛,任康江. 高承压水与深部应力耦合作用下顶板运移及应力显现规律. 煤矿安全. 2023(04): 169-174 . 本站查看
    4. 马祥,白贤栖,曹安业,曾海利,黄锐,张德兵,秦续峰,张润兵. 基于微震分布特征的覆岩结构演化规律研究. 煤矿安全. 2023(12): 80-87 . 本站查看
    5. 侯恩科,刘博,龙天文,徐维,魏启明,马进勇. 深埋缓倾斜双煤层开采导水断裂带发育规律研究. 煤矿安全. 2022(03): 50-57 . 本站查看
    6. 关众. 霍洛湾煤矿22206工作面水体下安全开采技术. 煤矿安全. 2022(12): 54-61 . 本站查看

    其他类型引用(3)

计量
  • 文章访问数:  374
  • HTML全文浏览量:  0
  • PDF下载量:  0
  • 被引次数: 9
出版历程
  • 发布日期:  2016-02-19

目录

    /

    返回文章
    返回