Experimental study on high temperature heat source positioning based on infrared temperature measurement technology

CHANG Qingyang; GUO Liwen; WU Jianguo; PANG Fengling

Safety in Coal Mines > 2022 > 53(9): 100-105.

CHANG Qingyang, GUO Liwen, WU Jianguo, PANG Fengling. Experimental study on high temperature heat source positioning based on infrared temperature measurement technology[J]. Safety in Coal Mines, 2022, 53(9): 100-105.

Citation:

PDF (2988 KB)

Experimental study on high temperature heat source positioning based on infrared temperature measurement technology

More Information

Published Date: September 19, 2022

Graphical Abstract

Abstract

Abstract

Aiming at the problems of real-time monitoring of the temperature of the heat source in the goaf and accurate positioning of the high-temperature point, the temperature variation law of the high-temperature heat source in the goaf model is studied by using the non-contact infrared temperature measuring device. The relationship between heat source temperature, heating time, temperature measured by sensor and temperature measurement distance is analyzed, and the equation of heat source location under ideal conditions is deduced. Based on the heat source temperature change rate, the heat source temperature time piecewise fitting model and the sensor measured temperature iterative compensation model correct the fitting error of the data and the systematic error of the device. The results show that the temperature of the heat source changes as a quadratic function with the heating time, and the heating rate of the heat source increases first and then decreases; the temperature measured by the sensor is directly proportional to the temperature of the heat source, and the temperature receiving rate of the sensor is inversely proportional to the temperature measurement distance; the maximum relative error of the corrected heat source temperature is 0.48%, and the average absolute error of the temperature measurement distance is 0.1 m.
- infrared temperature measurement,
- heat source temperature,
- heat source location,
- heating time,
- error correction

FullText(HTML)

References (19)

References

[1]	周斌，周文强，董智宇，等．氧化升温过程中煤岩介质体氡析出特性实验研究[J]．煤炭学报，2020，45（Ｓ2）：859－866. ZHOU Bin, ZHOU Wenqiang, DONG Zhiyu, et al. Experimental study on radon exhalation characteristics of coal and rock during oxidation and heating[J]. Journal of China Coal Society, 2020, 45（Ｓ2）: 859-866.
[2]	谢俊文，卢熹，上官科峰，等．分布式光纤测温技术在大倾角易燃煤层采空区自燃监测中的应用[J]．煤矿安全，2014，45（11）：118－121. XIE Junwen, LU Xi, SHANGGUAN Kefeng, et al. Application of distributed optical fiber temperature detection technology in spontaneous combustion monitoring of large angle flammable coal seam goaf[J]. Safety in Coal Mines, 2014, 45（11）: 118-121.
[3]	张建业，陈举师，孙新．漏风测定和煤温监测防治采空区煤炭自燃技术[J]．矿业安全与环保，2016，43（3）：60－63. ZHANG Jianye, CHEN Jushi, SUN Xin. Control technology for coal spontaneous combustion in gobs based on air leakage determination and coal temperature monitoring[J]. Mining Safety and Environmental Protection, 2016, 43（3）: 60-63.
[4]	李锋，罗伙根，王超．采空区埋管抽采下自燃“三带”分布规律研究[J]．煤矿安全，2020，51（2）：169－173. LI Feng, LUO Huogen, WANG Chao. Study on distribution law of spontaneous combustion “three belts” in goaf with buried pipe extraction[J]. Safety in Coal Mines, 2020, 51（2）: 169-173.
[5]	曹文辉，王飞．基于光纤测温技术判定采空区自燃危险区域的研究[J]．矿业安全与环保，2020，47（6）：75. CAO Wenhui, WANG Fei. Study on the identification of spontaneous combustion hazard area in goaf based on optical fiber temperature measurement technology[J]. Mining Safety and Environmental Protection, 2020, 47（6）: 75.
[6]	刘振岭，郑忠亚．采空区煤体自燃温度场演变模拟试验研究[J]．煤炭科学技术，2020，48（8）：114－120. LIU Zhenling, ZHENG Zhongya. Simulation test study on temperature field evolution of coal spontaneous combustion in gob[J]. Coal Science and Technology, 2020, 48（8）: 114-120.
[7]	高玉坤，田园，黄志安，等．采空区温度场相似模拟实验台的研制与应用[J]．矿业研究与开发，2022，42（2）：139－143. GAO Yukun, TIAN Yuan, HUANG Zhian, et al. Development and application of similarity test bench of temperature field in goaf[J]. Mining Research and Development, 2022, 42（2）: 139-143.
[8]	丁鹏翔．采空区隐蔽热源的气热场特性研究[D]．徐州：中国矿业大学，2020.
[9]	高东，郭立稳，王福生，等．采空区自燃危险区域数值模拟[J]．中国科技论文，2022，17（1）：78－84. GAO Dong, GUO Liwen, WANG Fusheng, et al. Spontaneous combustion hazard area in goaf based on numerical simulation[J]. China Sciencepaper, 2022, 17（1）: 78-84.
[10]	曹健．基于光纤测温技术的蒙西地区侏罗纪煤层采空区火区探测研究[D]．廊坊：华北科技学院，2017.
[11]	郑园，赵华玮，苗可彬．分布式光纤测温系统在采空区火灾监控预警中的应用[J]．煤炭技术，2014，33（9）：291－293. ZHENG Yuan, ZHAO Huawei, MIAO Kebin. Application of distributed optical fiber temperature measurement system in goaf fire early warning[J]. Coal Technology, 2014, 33（9）: 291-293.
[12]	程根银，唐晶晶，曹健，等．基于光纤测温系统的矿井采空区“三带”研究[J]．中国煤炭，2016，42（12）：107－110. CHENG Genyin, TANG Jingjing, CAO Jian, et al. Research on “three zone” of goaf based on optical fiber temperature measurement system[J]. China Coal, 2016, 42（12）: 107-110.
[13]	陈清华，张国枢，戴广龙，等．松散煤体温度场试验研究[J]．安全与环境学报，2010，10（6）：180－183. CHEN Qinghua, ZHANG Guoshu, DAI Guanglong, et al. Investigative experiment on the loose coal heating field[J]. Journal of Safety and Environment, 2010, 10（6）: 180-183.
[14]	杨永辰，米万升，曹少方，等．基于红外探测技术的巷道火源预测预报模拟研究[J]．煤炭技术，2018，37（12）：124－126. YANG Yongzhen, MI Wansheng, CAO Shaofang, et al. Simulation research on prediction of roadway fire source based on infrared detection technology[J]. Coal Technology, 2018, 37（12）: 124-126.
[15]	杜玉玺，胡振琪，葛运航，等．距离对不同强度热源红外测温影响及补偿[J]．红外技术，2019，41（10）：976－981. DU Yuxi, HU Zhenqi, GE Yunhang, et al. Distance influence and compensation of infrared temperature measurement with different intensity heat sources[J]. Infrared Technology, 2019, 41（10）: 976-981.
[16]	沈亚楠，张嘉勇．采空区热源温度红外测定试验研究[J]．矿业安全与环保，2022，49（1）：42－46. SHEN Yanan, ZHANG Jiayong. Experimental study on infrared measurement of heat source temperature in goaf[J]. Mining Safety and Environmental Protection, 2022, 49（1）: 42-46.
[17]	郭军，李帅，蔡国斌，等．采空区隐蔽火源探测及声学法煤温感知新技术探讨[J]．中国安全生产科学技术，2021，17（6）：5－11. GUO Jun, LI Shuai, CAI Guobin, et al. Discussion on new technologies of hidden fire source detection and coal temperature sensing by acoustic method for goal[J]. Journal of Safety Science and Technology, 2021, 17（6）: 5-11.
[18]	乔雨，杨宁，谭鹏，等．大体积混凝土红外测温影响因素研究与工程应用[J]．清华大学学报（自然科学版），2021，61（7）：730－737. QIAO Yu, YANG Ning, TAN Peng, et al. Engineering application and factors affecting infrared temperature measurements of mass concrete surfaces[J]. Journal of Tsinghua University（ＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ）, 2021, 61（7）: 730-737.
[19]	魏绍亮，王敬山，韩连伟，等．补偿强反光体表面红外测温误差的算法研究[J]．激光与红外，2019，49（2）：187－193. WEI Shaoliang, WANG Jingshan, HAN Lianwei, et al. Algorithm of compensation infrared temperature measurement error on strong reflector[J]. Laser and Infrared, 2019, 49（2）: 187-193.

[1]	LIU Yuliang, LYU Mingjie, XU Yangming, DUAN Weihua. Research on diffusion characteristics of cutting turbulent dust in fully mechanized working face with large mining height[J]. Safety in Coal Mines, 2024, 55(12): 123-131. DOI: 10.13347/j.cnki.mkaq.20240360
[2]	GONG Xiaoyan, WEI Minjie, CHEN Long, FU Haoran, CHANG Huqiang, HE Zilun, ZHANG Hongbing. Optimization analysis of dust field under the comprehensive control of air flow control device and jet air curtain at fully mechanized excavation face[J]. Safety in Coal Mines, 2024, 55(10): 214-220. DOI: 10.13347/j.cnki.mkaq.20231724
[3]	HAN Wenjie, ZHANG Hu, SHI Lei, QIN Na. Research on dust control mechanism of fully-mechanized mining face based on a new air distribution dust control method[J]. Safety in Coal Mines, 2024, 55(7): 59-67. DOI: 10.13347/j.cnki.mkaq.20231439
[4]	MA Lian, LI Yucheng, REN Jianye, CHEN Hui. Designing and dust control performance of internal and external dual swirl air curtain in fully mechanized excavation face[J]. Safety in Coal Mines, 2023, 54(11): 188-197. DOI: 10.13347/j.cnki.mkaq.2023.11.025
[5]	SUN Liansheng. Study on the influence of air outlet form change of dust control air duct on dust transport in tunneling working face[J]. Safety in Coal Mines, 2023, 54(8): 45-51.
[6]	LIU Huijing. Study on optimization of ventilation and dust removal parameters in heading face based on air curtain shielding[J]. Safety in Coal Mines, 2022, 53(10): 152-159.
[7]	WANG Hao, SA Zhanyou, WANG Chunyuan, WU Jingbo. Influences of ventilation conditions of fully mechanized excavation face on dust-resistance effect of radial swirling air curtain[J]. Safety in Coal Mines, 2022, 53(3): 186-192.
[8]	WANG Jianguo, WANG Kang, FAN Yiyang. Influence of slot parameters of wall-attached air duct on dust control effect of fully mechanized mining face[J]. Safety in Coal Mines, 2021, 52(6): 206-210.
[9]	LI Zhi. Influence of Radial Outlet Angle of Fresh Air on Dust Control at Fully Mechanized Excavating Face[J]. Safety in Coal Mines, 2016, 47(7): 190-192.
[10]	HUANG Jin-xing. Dust Diffusion Laws and Air Curtain Controlling Dust Technology in Tunneling Working Face[J]. Safety in Coal Mines, 2013, 44(9): 88-91.

Cited By

Get Citation

PDF

XML

Article views (76) PDF downloads (12)

Turn off MathJax

Article Contents

Abstract

References

Experimental study on high temperature heat source positioning based on infrared temperature measurement technology

Abstract

References

Related Articles

Catalog

Experimental study on high temperature heat source positioning based on infrared temperature measurement technology

Abstract

References

Related Articles

Catalog

Export File

Citation

Format

Content