- Chinese Core Periodicals
- Chinese Core Journals of Science and Technology
- RCCSE Chinese Authoritative Academic Journals
| Citation: |
GONG Xiaoyan, WEI Minjie, CHEN Long, et al. Optimization analysis of dust field under the comprehensive control of air flow control device and jet air curtain at fully mechanized excavation face[J]. Safety in Coal Mines, 2024, 55（10）: 214−220. DOI: 10.13347/j.cnki.mkaq.20231724
|
To solve the problem of serious pollution and dust accumulation under the traditional mixed ventilation of the fully mechanized excavation face, the idea of using the air flow control device of the air outlet and the jet air curtain of the exhaust outlet to optimize the dust field is proposed. Taking the fully mechanized excavation face of a mine in northern Shaanxi as the research object, a finite element model of the airflow-dust gas-solid coupling field was established, and the influence of the diameter and right angle of the air flow control device and the width, speed and opening angle of the air curtain outlet on the dust field was analyzed, and orthogonal experiments were designed to determine the best comprehensive control scheme. The results show that under the ventilation system of the fully mechanized excavation face, when the diameter of the control device is 1.2 m, the right deviation angle of the control device is 9°, the width of the air curtain outlet is 0.14 m, the speed of the air curtain outlet is 7 m/s, and the angle of the air curtain outlet is 60°, the dust mass concentration at the driver’s position and the average dust mass concentration at the height of the pedestrian breathing belt are reduced by 91.7% and 74.9%, respectively, and the test error is less than 10%, effectively improving the ventilation environment.
| [1] |
袁亮. 煤矿粉尘防控与职业安全健康科学构想[J]. 煤炭学报,2020,45(1):1−7.
YUAN Liang. Scientific conception of coal mine dust control and occupational safety[J]. Journal of China Coal Society, 2020, 45(1): 1−7.
|
| [2] |
陈刚,张晓蕾,徐帅,等. 我国2005—2020年粉尘爆炸事故统计分析[J]. 中国安全科学学报,2022,32(8):76−83.
CHEN Gang, ZHANG Xiaolei, XU Shuai, et al. Statistical analysis on dust explosion accidents in China from 2005 to 2020[J]. China Safety Science Journal, 2022, 32(8): 76−83.
|
| [3] |
李德文,赵政,郭胜均,等. “十三五”煤矿粉尘职业危害防治技术及发展方向[J]. 矿业安全与环保,2022,49(4):51−58.
LI Dewen, ZHAO Zheng, GUO Shengjun, et al. “13th Five-Year Plan” coal mine dust occupational hazard prevention and control technology and development direction[J]. Mining Safety & Environmental Protection, 2022, 49(4): 51−58.
|
| [4] |
刘荣华,王鹏飞,张登春,等. 机掘工作面旋转射流屏蔽通风吹吸流量比研究[J]. 中国安全科学学报,2012,22(9):133−139.
LIU Ronghua, WANG Pengfei, ZHANG Dengchun, et al. Study on flow ratio of blowing to drawing of rotational jet shield ventilation at tunneling working face[J]. China Safety Science Journal, 2012, 22(9): 133−139.
|
| [5] |
刘荣华,朱必勇,王鹏飞,等. 综掘工作面双径向旋流屏蔽通风控尘机理[J]. 煤炭学报,2021,46(12):3902−3911.
LIU Ronghua, ZHU Biyong, WANG Pengfei, et al. Dust control mechanism of double radial swirl shielding ventilation in fully mechanized heading face[J]. Journal of China Coal Society, 2021, 46(12): 3902−3911.
|
| [6] |
王鹏飞,刘荣华,陈世强,等. 机掘工作面旋转射流屏蔽通风最佳送风角度的确定[J]. 中南大学学报(自然科学版),2015,46(10):3808−3813. doi: 10.11817/j.issn.1672-7207.2015.10.034
WANG Pengfei, LIU Ronghua, CHEN Shiqiang, et al. Determination of the best air-supply angle of the rotational jet shield ventilation at tunneling working face[J]. Journal of Central South University (Science and Technology), 2015, 46(10): 3808−3813. doi: 10.11817/j.issn.1672-7207.2015.10.034
|
| [7] |
聂文,刘阳昊,程卫民,等. 多向涡流风幕阻隔粉尘弥散的模拟实验[J]. 中南大学学报(自然科学版),2016,47(1):350−358. doi: 10.11817/j.issn.1672-7207.2016.01.048
NIE Wen, LIU Yanghao, CHENG Weimin, et al. Simulation experiment on multi-direction whirling air curtain preventing dust diffusion[J]. Journal of Central South University (Science and Technology), 2016, 47(1): 350−358. doi: 10.11817/j.issn.1672-7207.2016.01.048
|
| [8] |
孟晗,杨玉中,鲁忠良,等. 基于风幕隔尘集尘的综掘面粉尘防治研究[J]. 安全与环境学报,2020,20(6):2173−2180.
MENG Han, YANG Yuzhong, LU Zhongliang, et al. On the dust prevention and control of the fully mechanized workface based on the dust separation and collection of the air curtain[J]. Journal of Safety and Environment, 2020, 20(6): 2173−2180.
|
| [9] |
曹毅杰. 风动式射流风幕除尘风机的设计研究[J]. 制造业自动化,2014,36(19):150−153. doi: 10.3969/j.issn.1009-0134.2014.19.043
CAO Yijie. Research on design of pneumatic-driven jet stream curtain dust-collecting fan[J]. Manufacturing Automation, 2014, 36(19): 150−153. doi: 10.3969/j.issn.1009-0134.2014.19.043
|
| [10] |
马胜利,张强,龚晓燕. 综掘工作面门型风幕控尘除尘系统粉尘防治研究[J]. 矿业安全与环保,2022,49(2):16−20.
MA Shengli, ZHANG Qiang, GONG Xiaoyan. Research on dust prevention and control of door-type air curtain dust control and removal system in fully mechanized excavation face[J]. Mining Safety & Environmental Protection, 2022, 49(2): 16−20.
|
| [11] |
马胜利,张强,张凯铭. 综掘工作面风幕控尘除尘系统数值模拟研究[J]. 煤炭技术,2022,41(2):87−89.
MA Shengli, ZHANG Qiang, ZHANG Kaiming. Numerical simulation study on air curtain dust control system of fully mechanized excavation face[J]. Coal Technology, 2022, 41(2): 87−89.
|
| [12] |
WANG Hui, JIANG Zhongan, WANG Hui, et al. Experimental and simulation study of air curtain uniformity and analysis of air curtain’s dust barrier effect[J]. Journal of Wind Engineering Industrial Aerodynamics, 2023, 233: 1−13.
|
| [13] |
ZHANG Feng, LU Ying, WANG Yapeng, et al. Study on air curtain cooperative spray dust removal in heading face based on swirl theory[J]. Journal of Environmental Chemical Engineering, 2022, 10(6): 1−11.
|
| [14] |
龚晓燕,彭高高,宋涛,等. 掘进工作面长压短抽通风出风口风流调控参数研究[J]. 工矿自动化,2021,47(9):45−52.
GONG Xiaoyan, PENG Gaogao, SONG Tao, et al, Study on air flow control parameters of long-pressure and short-extraction ventilation air outlets in heading face[J]. Industry and Mine Automation, 2021, 47(9): 45−52.
|
| [15] |
龚晓燕,费颖豪,牛虎明,等. 掘进面出风口风流与风幕调控下的粉尘分布响应曲面优化研究[J]. 中国安全生产科学技术,2022,18(12):80−88.
GONG Xiaoyan, FEI Yinghao, NIU Huming, et al. Study on response surface optimization of dust distribution under regulation of air flow and air curtain at air outlet of excavation face[J]. Journal of Safety Science and Technology, 2022, 18(12): 80−88.
|
| [16] |
龚晓燕,赵晓莹,杨富强,等. 综掘面尘源动态变化下粉尘场优化的风流调控研究[J]. 煤炭工程,2021,53(2):122−126.
GONG Xiaoyan, ZHAO Xiaoying, YANG Fuqiang, et al. Wind flow control for optimization of dust field distribution under dynamic change of dust source in fully mechanized heading face[J]. Coal Engineering, 2021, 53(2): 122−126.
|
| [17] |
龚晓燕,樊江江,刘壮壮,等. 综掘面出风口及抽风口风流综合调控下粉尘场优化分析[J]. 煤炭学报,2021,46(S2):800−809.
GONG Xiaoyan, FAN Jiangjiang, LIU Zhuangzhuang, et al. Optimization analysis of dust field under comprehensive control of air outlet and exhaust air flow in fully mechanized excavation face[J]. Journal of China Coal Society, 2021, 46(S2): 800−809.
|
| [18] |
龚晓燕,赵少龙,刘壮壮,等. 掘进面风流监测及适应性智能调控系统研制[J]. 安全与环境学报,2023,23(2):424−434.
GONG Xiaoyan, ZHAO Shaolong, LIU Zhuangzhuang, et al. Development of airflow monitoring and adaptive intelligent control system for heading face[J]. Journal of Safety and Environment, 2023, 23(2): 424−434.
|
| [1] | LI Naiwen, WU Zhikai. The influence of task switching stimulus mode difference on alertness of supervisors based on event-related potentials[J]. Safety in Coal Mines, 2024, 55(10): 251-256. DOI: 10.13347/j.cnki.mkaq.20231872 |
| [2] | JIN Jingyan, TANG Mingyun, JIANG Bingyou, WANG Lele, CHEN Gonghui, WANG Dong. Study on wetting effect of multi-component surfactant compounding on bituminous coal[J]. Safety in Coal Mines, 2024, 55(1): 100-106. DOI: 10.13347/j.cnki.mkaq.20222312 |
| [3] | ZHU Lingqi, SANG Mingming, DU Jiaqi, LIU Chao. Construction of supercritical model for coal adsorbing CO based on adsorption potential theory[J]. Safety in Coal Mines, 2022, 53(9): 25-30. |
| [4] | ZHANG Xiaoyu, KANG Tianhe, ZHANG Runxu, ZHANG Bin, KANG Guanxian, ZHANG Liankun. Effect of Electric Potential Gradient on Methane Adsorption and Desorption Behaviors in Lean Coal Modified by Electrochemical Treatment[J]. Safety in Coal Mines, 2020, 51(9): 11-15. |
| [5] | WANG Qiao, WANG Zhaofeng. Study on Adsorption Potential Difference of Different Destructive Types of Coal[J]. Safety in Coal Mines, 2018, 49(12): 13-16. |
| [6] | ZHU Zhao. Analysis of Potential Ignition Source for Coal Mine Magnetic Couplings[J]. Safety in Coal Mines, 2018, 49(1): 122-125. |
| [7] | LIU Shuaijie, LI Zhonghui, NIU Yue, YIN Shan, KONG Yanhui, CHEN Fuqi, WEI Yang. Study on Electric Potential Characteristics of Coal Fracture Under Uniaxial Compression and Gas Confining Pressure[J]. Safety in Coal Mines, 2017, 48(6): 5-8. |
| [8] | GAO Wei, YI Tongsheng, JIN Jun, FU Wei, XU Hongjie, ZHOU Xiaozhi. Potential Analysis of Coalbed Methane Drainage in Guizhou Songhe Coal Mine[J]. Safety in Coal Mines, 2016, 47(8): 190-193,197. |
| [9] | NIU Yue, LI Zhonghui, LIU Jie, LI Xuelong, KONG Biao, SHEN Zhiwei, LOU Quan. Experimental Study on Surface Potential of Coal Measures Rock Samples Under Uniaxial Compression[J]. Safety in Coal Mines, 2015, 46(5): 28-31. |
| [10] | LIU Da-qing, LIU Zhen-tang, LI Zhong-hui, ZHANG Yong, LIU Jie, HU Shao-bin. Comparative Analysis on Surface Potential of the Cracks Generated in Different Stress State[J]. Safety in Coal Mines, 2012, 43(2): 163-166. |
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: