• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
YUN Dongfeng, LIU Zhu, CHENG Wendong, FAN Zhendong, SU Puzheng, WANG Dongfang, ZHANG Yuanhao. Monitoring Analysis of Side Guard Plate Load of Fully Mechanized Caving Support in Large Dip Angle Thick Coal Seam[J]. Safety in Coal Mines, 2016, 47(10): 216-219.
Citation: YUN Dongfeng, LIU Zhu, CHENG Wendong, FAN Zhendong, SU Puzheng, WANG Dongfang, ZHANG Yuanhao. Monitoring Analysis of Side Guard Plate Load of Fully Mechanized Caving Support in Large Dip Angle Thick Coal Seam[J]. Safety in Coal Mines, 2016, 47(10): 216-219.

Monitoring Analysis of Side Guard Plate Load of Fully Mechanized Caving Support in Large Dip Angle Thick Coal Seam

More Information
  • Published Date: October 19, 2016
  • To evaluate the adaptation of side guard plate at 37220-2 large dip angle thick coal seam fully mechanized caving face of Dongxia Coal Mine, by site observation, we got the side guard plate load characteristics. The monitoring results showed that the side guard plate is subjected to lateral force in generally, and side plate load is usually under 5 MPa, but when the lateral supports are adjusted, the pressure is higher instantaneously, and the load is up to 20 MPa to 25 MPa during periodic weighting. The monitoring analysis showed that the lateral force depends on the stability of support, there is larger lateral force when support is toppling or skidding and vice versa. The side plate of hydraulic support not only had an effect on preventing gangue leakage between adjacent hydraulic supports, but also more importantly adjusted support and prevented gliding and toppling in steeply dipping coal seam. Therefore, the side plate should be called "side adjusting plate", with the function of adjusting supports and preventing waste rocks, and more importantly play an important in adjusting supports. From the practical application and monitoring data of side plate, the overall strength of side plate is higher and the side plate using φ100 mm big cylinder bore side pushing jack can basically play role in adjusting support effectively in 37220-2 fully mechanized caving face.
  • [1]
    伍永平,贠东风,张淼丰. 大倾角煤层综采基本问题研究[J].煤炭学报,2000,25(5):465-468.
    [2]
    伍永平,刘孔智,贠东风,等.大倾角煤层安全高效开采技术研究进展[J].煤炭学报,2014,39(8):1611.
    [3]
    贠东风,刘柱,程文东,等.大倾角特厚易燃煤层倾斜分层走向长壁综采技术[J].煤炭科学技术,2015,43(10):7-11.
    [4]
    吴绍倩,石平五.急倾斜煤层矿压显现规律的研究[J].西安矿业学院学报,1990,10(2):4-8.
    [5]
    Wang Jinhua. Development and prospect on fully mechanized mining in Chinese coal mines[J]. International Journal of China Coal Society, 2014,1(3):253-260.
    [6]
    Luo Yi. An improved influence function method for predicting subsidence caused by longwall mining operations in inclined coal seams[J].International Journal of China Coal Society, 2015,2(3):163-169.
    [7]
    贠东风,刘志远,伍永平,等.三软煤层大倾角综放面倒架原因分析及扶架技术研究[J].煤炭技术,2014,33(5):31-33.
    [8]
    刘志远.大倾角煤层综放面倒架机理与再稳定技术研究[D].西安:西安科技大学,2014.
    [9]
    薛仁龙,魏栋梁,张少秋,等. 液压支架侧护板新型锁紧装置设计[J].煤炭科学技术, 2010, 38(10):69.
    [10]
    冀贵升,赵红梅. 液压支架侧护板产生蹩卡的原因[J].煤矿开采,2008,13(1):78-81.
    [11]
    薛仁龙,李景辉,王悦勇,等. 液压支架侧护板结构特点与改进[J].煤矿机电,2014,31(3):96-97.
    [12]
    柳佳岐,王 旭,魏栋梁,等.液压支架侧护板的力学分析与计算[J].煤矿机械,2010,31(10):15-16.
    [13]
    王国法. 液压支架技术[M].北京:煤炭工业出版社,1999.
    [14]
    于飞,李炳文,李振龙. 急倾斜综放工作面液压支架双向活动侧护板设计关键技术[J].煤矿机械,2012,33(12):5-6.
    [15]
    章黎明. 王家山煤矿大倾角厚煤层综放采场矿压规律研究[J].煤炭科学技术,2007,35(12):22-26.
    [16]
    耿献文,马全礼,刘桂仁,等. 矿山压力测控技术[M].徐州:中国矿业大学出版社,2001.
    [17]
    贠东风,伍永平.大倾角煤层综采工作面调伪仰斜的原理与方法[J]. 辽宁工程技术大学学报(自然科学版),2001,20(2):152-156.
    [18]
    林忠明,陈忠辉,谢俊文,等. 大倾角综放开采液压支架稳定性分析与控制措施[J].煤炭学报,2004,29(3):264-268.
    [19]
    谢俊文,高小明,上官科峰. 急倾斜厚煤层走向长壁综放开采技术[J].煤炭学报,2005,30(5):545.
    [20]
    程文东, 王军, 贠东风等. 大倾角特厚煤层综采放顶煤技术研究[R].兰州:靖远煤业集团公司王家山煤矿, 西安:西安科技学院, 2003.
  • Related Articles

    [1]ZHANG Ruixiao. Pressure Sharing Technology in Fully Mechanized Mining Face Along Goaf and Application[J]. Safety in Coal Mines, 2018, 49(S1): 63-67.
    [2]ZHANG Lihui, ZHANG Yunzeng. Application of Co-rotating Pneumatic Air Door in Pressure Balancing Ventilation System[J]. Safety in Coal Mines, 2018, 49(S1): 45-48.
    [3]LI Bin, YANG Yingbing. Low Oxygen Prevention and Control for Shallow-buried Depth and Large Area Goaf at Fully Mechanized Working Face Based on Pressure Balance Ventilation Technique[J]. Safety in Coal Mines, 2017, 48(s1): 94-98.
    [4]QIN Qinghe, ZHANG Lihui. Safety Technology and Emergency Disposal Measures for Pressure Balancing Ventilation at 22307 Working Face of Bulianta Coal Mine[J]. Safety in Coal Mines, 2017, 48(s1): 69-71,75.
    [5]WANG Haisheng. Application of Pressure Balancing Ventilation for Fire Preventing and Extinguishing at Double Working Face of Bandingliangta Coal Mine[J]. Safety in Coal Mines, 2017, 48(4): 144-147.
    [6]LIU Zikun. Phenomenon Analysis for Pressure Balancing Ventilation “Equilibrium Point” in Xiagou Coal Mine[J]. Safety in Coal Mines, 2017, 48(2): 128-130,134.
    [7]ZHANG Mingliang, XU Jingrong, HE Shuai. Pressure Balancing Ventilation Technology for Fire Prevention in Room Mining Goaf[J]. Safety in Coal Mines, 2016, 47(11): 77-79,86.
    [8]MAO Long, AI Xing, YE Fang-qi, HE Fu-quan. The Gas Monitoring Based on Pulling-down Methods at Withdraw Working Face With Pressure Balancing Ventilation[J]. Safety in Coal Mines, 2013, 44(5): 142-144.
    [9]WANG Chun-qiao, WANG Yun-fei, LIU Wan-bing, CHEN Zan. Numerical Simulation of Pressure Balancing Ventilation Technology in Treating Gob CO Emission[J]. Safety in Coal Mines, 2012, 43(12): 41-45.
    [10]LI Deng-yi, CAO Wen-ping, WU Ri-ming, WANG Chun-lin. The Application of Pressure Balancing Ventilation Technology in Upper Corner Gas Control[J]. Safety in Coal Mines, 2012, 43(6): 111-113.
  • Cited by

    Periodical cited type(2)

    1. 衡献伟 ,付金磊 ,李青松 ,左金芳 . 突出煤层微震动态响应与多参量指标预警方法. 湖南科技大学学报(自然科学版). 2022(04): 1-8 .
    2. 李晋阳. 矿井生产中高位钻孔瓦斯抽放技术应用分析. 能源与节能. 2020(09): 184-185 .

    Other cited types(1)

Catalog

    Article views (278) PDF downloads (0) Cited by(3)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return