Design of Gas Sensor Based on PWM Zero Calibration

WU Yincheng; LIU Jingwei; XIN Yongxiang; ZHANG Xiaobo

Safety in Coal Mines > 2015 > 46(5): 106-108.

WU Yincheng, LIU Jingwei, XIN Yongxiang, ZHANG Xiaobo. Design of Gas Sensor Based on PWM Zero Calibration[J]. Safety in Coal Mines, 2015, 46(5): 106-108.

Citation:

WU Yincheng, LIU Jingwei, XIN Yongxiang, ZHANG Xiaobo. Design of Gas Sensor Based on PWM Zero Calibration[J]. Safety in Coal Mines, 2015, 46(5): 106-108.

Citation:

WU Yincheng, LIU Jingwei, XIN Yongxiang, ZHANG Xiaobo. Design of Gas Sensor Based on PWM Zero Calibration[J]. Safety in Coal Mines, 2015, 46(5): 106-108.

Design of Gas Sensor Based on PWM Zero Calibration

More Information

Published Date: May 19, 2015

Graphical Abstract

Abstract

Abstract

According to present gas sensors based on the carrier catalytic element, they need zero and linear calibration by manual adjustment, resulting in a large number of waste problems of manpower and material resources. A sensor design scheme is proposed in view of PWM zero calibration. The principle and the hardware circuit are analyzed about the existing carrier catalytic element for gas concentration measurement, the hardware circuit and control algorithm are proposed based on PWM zero calibration. Finally, it is introduced that PWM calibration can be realized remotely through the CAN bus communication of gas sensor.
- carrier catalytic element,
- gas sensor,
- PWM,
- zero calibration,
- CAN bus

FullText(HTML)

References (8)

References

[1]	刘海波,沈晶.催化燃烧式瓦斯传感器技术研究进展[J].智能计算机与应用,2011(5).
[2]	闫一功,张磊.矿灯式甲烷测报仪设计[J].煤矿安全,2008(9).
[3]	陈铁军,王志勇.基于PIC单片机的智能矿井瓦斯传感器[J].传感器与仪器仪表,2008,24(5).
[4]	王正洪,张小鸣,徐君.矿井瓦斯传感器自动调校技术及其研究进展[J].江苏工业学院学报,2004,16(2).
[5]	黄晶,阙沛文,唐景肃.基于单片机的瓦斯传感器零点调整及灵敏度校正系统[J].仪表技术与传感器,2004(1).
[6]	刘忠富,刘长宏,张维维.红外遥控技术在甲烷传感器中的应用[J].工矿自动化,2008(3).
[7]	胡恩翰,王平安.瓦斯传感器红外遥控器的新思路[J].煤矿自动化,2001(6).
[8]	张振华,陈军,侯娇艳.RS485-CAN总线转换器设计与实现[J].仪器仪表用户,2011(5).

[1]	HAO Gang, YU Dinghao, XU Ying, WANG Li, LIU Hong. Numerical simulation and field test of height of caving zone and fracture zone in Heshan Coal Mine[J]. Safety in Coal Mines, 2023, 54(9): 174-179. DOI: 10.13347/j.cnki.mkaq.2023.09.023
[2]	WAN Feng, ZHANG Hongqing, ZHOU Peijun, GUO Jie. Numerical simulation study on effect of bedrock intrusion on strata behaviors of roadway[J]. Safety in Coal Mines, 2021, 52(10): 211-216.
[3]	WANG Xiaojian, LI Zhaosheng, ZHANG Liangliang, SUN Shiyuan, SHEN Renwei, FANG Gensheng. Numerical analysis of time-sharing differential freezing temperature field in coal mine[J]. Safety in Coal Mines, 2021, 52(7): 200-206.
[4]	LI Li. Application of Numerical Simulation in Analyzing Water Flowing Fractured Zone in Coal[J]. Safety in Coal Mines, 2017, 48(10): 160-162,166.
[5]	CUI Kai, ZHANG Zhao-qian, ZHANG Bai-sheng, XIE Fu-xing. Study on Strata Behavior Laws at Hard Roof Working Face in Jincheng Mining Area[J]. Safety in Coal Mines, 2013, 44(12): 166-168,171.
[6]	ZHANG Lian-ying, MA Chao, LI Yan. Numerical Simulation of Bolting Support Mechanism[J]. Safety in Coal Mines, 2013, 44(9): 71-73.
[7]	MA Mang-li. Strata Behavior Simulation and Field Measurement for Fully Mechanized Mining Face in Thick Seam[J]. Safety in Coal Mines, 2013, 44(8): 226-228.
[8]	WANG Yi-dong, JIANG Zhen-quan, ZHU Shu-yun, ZHANG Rui. Contrast of Numerical Simulation and Field Measurement on Deformation and Failure in Thick Seam Mining Floor[J]. Safety in Coal Mines, 2012, 43(10): 35-37.
[9]	CHANG Gang, JIANG Zhen-quan, JIA Xue-mei, ZHANG Rui, SUN Qiang. Study on Roof Strata Behavior Laws of A Certain Coal Mine During Mining[J]. Safety in Coal Mines, 2012, 43(7): 38-41.
[10]	YANG Ming, MENG Xiang-rui, GAO Zhao-ning, CHENG Xiang. Numerical Simulation of Ground Strata behavior Laws of Overlying Strata Movement at Stope[J]. Safety in Coal Mines, 2012, 43(6): 17-20,21.

Cited By

Cited by

Periodical cited type(19)

1.	丁华忠，王力，景慎怀，黄寒静，陈洪岩，程合玉，李明强，曾庆辉，聂超. 松软煤层条带预抽底板梳状孔成孔及飞管完孔技术研究. 煤炭技术. 2025(03): 141-145 .
2.	聂子淇，王超群. 煤矿复杂地层底板梳状定向钻孔钻进工艺技术研究. 能源与节能. 2024(01): 153-157 .
3.	杨旭，王涛，李明. 孤岛工作面长水平深孔全长水力压裂卸压机理及多参量效果分析. 煤矿安全. 2024(02): 147-158 . 本站查看
4.	武晓光，龙腾达，黄中伟，高文龙，李根生，谢紫霄，杨芮，鲁京松，马金亮. 页岩油多岩性交互储层径向井穿层压裂裂缝扩展特征. 石油学报. 2024(03): 559-573+585 .
5.	张洪祯. 高位定向长钻孔瓦斯抽采技术在高山煤矿瓦斯治理中的应用. 科技创新与应用. 2024(20): 189-192 .
6.	李定启，张浩海. 五阳煤矿松软煤层定向水射流卸压增透技术研究. 矿业研究与开发. 2024(09): 116-122 .
7.	倪兴. 叠加效应下多孔水力割缝联合抽采参数优化研究. 工矿自动化. 2023(01): 146-152 .
8.	李鹏. 水力压裂技术在煤矿瓦斯治理中的应用研究. 内蒙古煤炭经济. 2023(02): 4-6 .
9.	武瑞龙. 复杂地层底板梳状定向钻孔抽采瓦斯技术研究. 煤炭工程. 2023(06): 79-82 .
10.	王正帅. 碎软煤层条带定向长钻孔水力压裂强化瓦斯抽采技术研究. 中国煤炭. 2023(06): 46-52 .
11.	贾猛. 郭庄矿井下新型水力压裂技术的应用分析. 山东煤炭科技. 2023(08): 188-190 .
12.	李建军，刘文岗，杜君武，任健刚. 定向长钻孔分段水力压裂技术在布尔台煤矿的应用. 煤矿安全. 2022(04): 94-102 . 本站查看
13.	吴晋军. 长平矿大功率定向长钻孔瓦斯抽采技术实践. 江西煤炭科技. 2022(02): 165-167+170 .
14.	赵坤，李文，欧聪. 穿层梳状分支孔煤层段精准水力压裂工程试验. 煤矿安全. 2022(06): 89-95 . 本站查看
15.	魏启磊. 松软低透煤层掘进工作面聚能爆注定向卸压一体化技术研究. 煤. 2022(08): 49-52 .
16.	张士岭，宋志强. 基于速度势的多抽采钻孔干扰理论. 矿业研究与开发. 2022(09): 22-28 .
17.	何明川. 层状构造煤层定向钻孔水力压裂瓦斯高效抽采技术. 煤矿安全. 2022(12): 62-67 . 本站查看
18.	吕二忠. 水力冲孔技术在瓦斯抽采中的应用. 科学技术创新. 2021(29): 129-131 .
19.	贺斌，雷鹏翔，弓仲标. 水力压裂技术在大柳塔煤矿52502工作面的应用. 煤炭科学技术. 2021(S2): 78-84 .

Other cited types(0)

Get Citation

XML

Article views (486) PDF downloads (0) Cited by(19)

Turn off MathJax

Article Contents

Abstract

References

Design of Gas Sensor Based on PWM Zero Calibration

Abstract

References

Related Articles

Cited by

Periodical cited type(19)

Other cited types(0)

Catalog

Design of Gas Sensor Based on PWM Zero Calibration

Abstract

References

Related Articles

Cited by

Periodical cited type(19)

Other cited types(0)

Catalog

Export File

Citation

Format

Content