- Chinese Core Periodicals
- Chinese Core Journals of Science and Technology
- RCCSE Chinese Authoritative Academic Journals
| Citation: |
YANG Xu, WANG Jianqiang, ZHANG Hongjie, et al. Gas control technology of sleeve milling and fishing for directional drilling in broken soft coal seam[J]. Safety in Coal Mines, 2024, 55（2）: 71−77. DOI: 10.13347/j.cnki.mkaq.20221798
|
Aiming at the technical problem of abnormal gas outflow caused by collapsed holes in the process of directional drilling and sleeve milling in broken-soft coal seams, a gas prevention technology was proposed for directional drilling and sleeve-milling salvage in broken-soft coal seams. On the basis of the existing casing milling salvage technology, the gas drainage pipeline system in the casing milling salvaging drilling tool is optimized, and a large amount of gas accumulated in the salvaging drilling tool during the casing milling salvage process is drained and relieved. The salvage orifice airtight gas pumping system and the sleeve milling salvage rod anti-gas device can realize negative pressure extraction, airtight slag discharge and sealing rod addition in the whole process of sleeve milling salvage. The technology was used to successfully deal with a directional drilling stuck accident of crushed soft coal seam with hole depth of 362 m. In the treatment of the accident, the gas gathered in the fishing drill was extracted and pressure relieved through the gas extraction pipeline system in the fishing drill, and the gas gushing out of the hole and the end of the fishing drill pipe was realized through the closed gas extraction system in the hole and the anti-gas device in the rod. There was no over-limit gas accident in the whole salvage process.
| [1] |
王力,姚宁平,姚亚峰,等. 煤矿井下碎软煤层顺层钻完孔技术研究进展[J]. 煤田地质与勘探,2021,49(1):285-296.
WANG Li, YAO Ningping, YAO Yafeng, et al. Research progress of drilling and borehole completion technologies in broken soft coal seam in underground coal mine [J]. Coal Geology & Exploration, 2021, 49(1): 285-296.
|
| [2] |
姚宁平,王毅,姚亚峰,等. 我国煤矿井下复杂地层条件下钻探技术与装备进展[J]. 煤田地质与勘探,2020,48(2):1-7.
YAO Ningping, WANG Yi, YAO Yafeng, et al. Progress of drilling technologies and equipments for complicated geological conditions in underground coal mines in China[J]. Coal Geology & Exploration, 2020, 48(2): 1-7.
|
| [3] |
李泉新. 碎软煤层复合定向钻进技术研究与应用[J]. 煤炭科学技术,2018,46(1):101−106.
LI Quanxin. Research and application of drilling technology combined rotary with direction in soft-fragmentized coal seam[J]. Coal Science and Technology, 2018, 46(1): 101−106.
|
| [4] |
李泉新,王鲜,许超,等. 瓦斯抽采顺煤层超长距定向孔钻进关键技术[J]. 煤炭科学技术,2020,48(12):168−174.
LI Quanxin, WANG Xian, XU Chao, et al. Key technolgy of drilling with ultra-long-distance directional hole for gas drainage along coal seam[J]. Coal Science and Technology, 2020, 48(12): 168−174.
|
| [5] |
姚宁平,张杰,李泉新,等. 煤矿井下梳状定向孔钻进技术研究与实践[J]. 煤炭科学技术,2012,40(5):30−34.
YAO Ningping, ZHANG Jie, LI Quanxin, et al. Researchment and application of comb type directional borehole drilling technology in underground mine[J]. Coal Science and Technology, 2012, 40(5): 30−34.
|
| [6] |
李泉新,石智军. 煤矿井下定向钻进技术的应用[J]. 煤田地质与勘探,2014,42(2):86−88.
LI Quanxin, SHI Zhijun. Application of directional drilling technology in coal mine[J]. Coal Geology & Exploration, 2014, 42(2): 86−88.
|
| [7] |
张杰. 气动定向钻进技术在松软煤层条带瓦斯预抽中的应用[J]. 煤田地质与勘探,2021,49(3):256−261.
ZHANG Jie. The application of pneumatic directional drilling technology in gas pre-drainage of strips in soft coal seams[J]. Coal Geology & Exploration, 2021, 49(3): 256−261.
|
| [8] |
张杰,王毅,黄寒静. 软煤气动螺杆钻具定向钻进技术与装备[J]. 煤田地质与勘探,2020,48(2):36−41.
ZHANG Jie, WANG Yi, HUANG Hanjing. Directional drilling technology and equipment of pneumatic screw motor in soft seam[J]. Coal Science and Technology, 2020, 48(2): 36−41.
|
| [9] |
方俊,刘飞,李泉新,等. 煤矿井下碎软煤层空气复合定向钻进技术与装备[J]. 煤炭科学技术,2019,47(2):224−229.
FANG Jun, LIU Fei, LI Quanxin et al. Air compound directional drilling technology and equipment for soft-fragmentized seam underground coal mine[J]. Coal Science and Technology, 2019, 47(2): 224−229.
|
| [10] |
许超,石智军. 煤矿井下定向钻进钻孔事故的预防及处理[J]. 煤田地质与勘探,2014,42(3):100−104.
XU Chao, SHI Zhijun. Prevention and treatment of drilling accident in underground coal mine[J]. Coal Geology and Exploration, 2014, 42(3): 100−104.
|
| [11] |
王二鹏,王大鹏. 煤矿井下超长钻孔常见事故原因分析及处理方法[J]. 煤炭科学技术,2012(7):58−61.
WANG Erpeng, WANG Dapeng. Cause analysis and solution of comment faults occurred in overlong borehole in underground mine[J]. Coal Science and Technology, 2012(7): 58−61.
|
| [12] |
牟培英. 套铣打捞钻杆的研究及应用[J]. 煤矿机械,2016,37(10):88−91.
MOU Peiying. Research and application on sleeve fishing rod for directional drilling[J]. Coal Mine Machinery, 2016, 37(10): 88−91.
|
| [13] |
管强盛,魏宏超. 底板梳状定向钻孔套铣打捞技术研究与应用[J]. 煤田地质与勘探,2019,47(6):212−217.
GUAN Qiangsheng, WEI Hongchao. Research and application of casing milling and fishing technology in floor comb-shaped directional borehole[J]. Coal Geology and Exploration, 2019, 47(6): 212−217.
|
| [14] |
王昕. 套铣打捞技术在矿井钻具断裂事故中的应用[J]. 煤矿安全,2014,45(9):155−157.
WANG Xin. Application of milling and fishing technology in mine drilling tool fracture accident[J]. Safety in Coal Mines, 2014, 45(9): 155−157.
|
| [15] |
管强盛,马利伟,魏洪超,等. 煤矿井下定向钻孔套铣打捞实施关键技术研究[J]. 煤炭技术,2022,41(1):59−62.
GUAN Qiangsheng, MA Liwei, WEI Hongchao, et al. Research on the key technology of implementing directional drilling, casing milling and salvage in underground coal mines[J]. Coal Technology, 2022, 41(1): 59−62.
|
| [16] |
谷旺鑫,鲁义,施式亮,等. 基于瓦斯抽采效果的钻孔塑性区范围优化及应用[J]. 中国安全生产科学技术,2021,17(1):26−30.
GU Wangxin, LU Yi, SHI Shiliang, et al. Optimization on plastic zone scope of borehole based on gas extraction effect and its application[J]. Journal of Safety Science and Technonlogy, 2021, 17(1): 26−30.
|
| [17] |
王建强,张杰. 煤矿井下定向深孔大孔径套铣打捞技术及工艺参数[J]. 煤炭科学技术,2019,47(8):189-193.
WANG Jianqiang, ZHANG Jie. Large aperture milling and salvage techonlogy and technic parameters of directional deep-hole in underground coal mine[J]. Coal Science and Technonlogy, 2019, 47(10): 189-193.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: