Mechanism of dust production during coal and rock cutting based on EDEM

WANG Lei; CHENG Yu; XU Rongxiao

Safety in Coal Mines > 2023 > 54(1): 22-28.

WANG Lei, CHENG Yu, XU Rongxiao. Mechanism of dust production during coal and rock cutting based on EDEM[J]. Safety in Coal Mines, 2023, 54(1): 22-28.

Citation:

WANG Lei, CHENG Yu, XU Rongxiao. Mechanism of dust production during coal and rock cutting based on EDEM[J]. Safety in Coal Mines, 2023, 54(1): 22-28.

Citation:

WANG Lei, CHENG Yu, XU Rongxiao. Mechanism of dust production during coal and rock cutting based on EDEM[J]. Safety in Coal Mines, 2023, 54(1): 22-28.

PDF (3736 KB)

Mechanism of dust production during coal and rock cutting based on EDEM

More Information

Published Date: January 19, 2023

Graphical Abstract

Abstract

Abstract

In order to analyze the mechanism of cutting and dust production of coal and rock driving machine, the three axis force model of coal and rock was constructed based on EDEM method, and the coal dust cutting mechanism under different cutting conditions was analyzed. The results show that the number of bonds between particles decreased periodically with the operation time of the cutting head, the cycle length is in the range of 0.2 s to 0.7 s, and the number of broken bonds between particles increases linearly with the cutting time; the average body mass and throwing velocity of particles in the process of coal cutting with cutting depth showed a distribution of cyclical fluctuations, in addition, the average particle throwing velocity of rock mass cutting is obviously larger; the cutting depth increased gradually with the increase of cutting head operating time and the average velocity of particle throwing shows an increasing trend of fluctuation from about 1.0 s; with the increase of cutting depth, the average speed of the particles increased periodically under different roof pressure conditions, and the height of cut coal has little influence on the dust generation process.
- driving face,
- cutting dust production,
- EDEM,
- dust pollution,
- analog simulation,
- dust-producing law,
- dust control

FullText(HTML)

References (19)

References

[1]	任志峰，李远知，武建君，等.采煤机割煤产尘及粉尘运移规律的数值模拟[J].煤矿安全，2021，52（7）：170-174. REN Zhifeng, LI Yuanzhi, WU Jianjun, et al. Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface[J]. Safety in Coal Mines, 2021, 52（7）: 170-174.
[2]	蒋仲安，杨斌，张国梁，等.高原矿井掘进工作面截割粉尘污染效应及通风控尘参数分析[J].煤炭学报，2021，46（7）：2146-2157. JIANG Zhongan, YANG Bin, ZHANG Guoliang, et al. Numerical analysis on migration of shearer-generated dust in mechanized coal mining workface[J]. Journal of China Coal Society, 2021, 46（7）: 2146-2157.
[3]	邹常富，刘勇，马威，等.综掘工作面粉尘的产生及运移规律研究[J].矿业安全与环保，2014，41（6）：26-28. ZOU Changfu, LIU Yong, MA Wei, et al. Study on dust generation and movement laws in fully-mechanized heading face[J]. Mining Safety & Environmental Protection, 2014（6）: 26-28.
[4]	Potyondy D O, Cundall P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41（8）: 1329-1364.
[5]	N CHO, C D MARTIN, D C SEGO. A clumped particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2007, 44（7）: 997-1010.
[6]	张晓龙，王义亮，杨兆建.基于EDEM的煤岩截割过程仿真分析[J].煤炭技术，2015，34（8）：243-244. ZHANG Xiaolong, WANG Yiliang, YANG Zhaojian. Simulation and analysis on coal cutting process based on EDEM[J]. Coal Technology, 2015, 34（8）: 243-244.
[7]	苗继军.基于EDEM的坚硬煤体力学特性仿真分析[J].煤矿机械，2022，43（10）：101-104. MIAO Jijun. Simulation analysis of mechanical properties of hard coal based on EDEM[J]. Coal Mine Machinery, 2022, 43（10）: 101-104.
[8]	申浩翰，张海，范俊锴，等.基于多参数拟合的EDEM岩石建模方法[J].岩土力学，2021，42（8）：2298-2310. SHEN Haohan, ZHANG Hai, FAN Junkai, et al. A rock modeling method of multi-parameters fitting in EDEM[J]. Rock and Soil Mechanics, 2021, 42（8）: 2298- 2310.
[9]	孟杰，孟文俊.影响EDEM仿真结果的因素分析[J].机械工程与自动化，2014（6）：49-51. MENG Jie, MENG Wenjun. Analysis of influencing factor on results of EDEM simulation[J]. Mechanical Engineering & Automation, 2014（6）: 49-51.
[10]	毛君，刘歆妍，陈洪月，等.基于EDEM的采煤机滚筒工作性能的仿真研究[J].煤炭学报，2017，42（4）：1069-1077. MAO Jun, LIU Xinyan, CHEN Hongyue, et al. Simulation of shearer drum cutting performance based on EDEM[J]. Journal of China Coal Society, 2017, 42（4）: 1069-1077.
[11]	董兵兵，李成栢.基于EDEM的截齿载荷及滚筒扭矩的研究与分析[J].矿业研究与开发，2020，40（7）：120-125. DONG Bingbing, LI Chengbai. Research and analysis on pick load and drum torque based on EDEM[J]. Mining Research and Development, 2020, 40（7）: 120-125.
[12]	问小江，方飞飞，刘应科，等.基于煤粉堆积角的EDEM颗粒接触参数标定[J].中国安全科学学报，2020，30（7）：114-119. WEN Xiaojiang, FANG Feifei, LIU Yingke, et al. Research on stacking angle of coal particles and parameter calibration on EDEM[J]. China Safety Science Journal, 2020, 30（7）: 114-119.
[13]	施从伟.综掘工作面控风除尘技术数值模拟研究及应用[J].煤矿安全，2020，51（6）：168-173. SHI Congwei. Numerical simulation research and application of air control and dust removal technology in fully mechanized driving face[J]. Safety in Coal Mines, 2020, 51（6）: 168-173.
[14]	赵跃民，张曙光，焦红光，等.振动平面上粒群运动的离散元模拟[J].中国矿业大学学报，2006（5）：586-590. ZHAO Yuemin, ZHANG Shuguang, JIAO Hongguang, et al. Simulation of discrete element of particles motion on the vibration plane[J]. Journal of China University of Mining & Technology, 2006（5）: 586-590.
[15]	赵丽娟，闻首杰，刘旭南.仿真颗粒半径对模拟滚筒截割复杂煤层的影响研究[J].机械科学与技术，2020，39（1）：52-57. ZHAO Lijuan, WEN Shoujie, LIU Xunan. The influence of simulated particle radius on complex coal seam of drum cutting[J]. Mechanical Science and Technology for Aerospace Engineering, 2020, 39（1）: 52-57.
[16]	丁翠.掘进巷道粉尘运移扩散规律研究进展[J].煤矿安全，2018，49（9）：219-222. DING Cui. Research progress of dust movement and diffusion laws in excavation roadway[J]. Safety in Coal Mines, 2018, 49（9）: 219-222.
[17]	王雅东，赵丽娟，张美晨.采煤机自适应调高控制策略[J].煤炭学报，2022，47（9）：3505-3522. WANG Yadong, ZHAO Lijuan, ZHANG Meichen. Research on self-adaptive height adjustment control strategy of shearer[J]. Journal of China Coal Society, 2022, 47（9）: 3505-3522.
[18]	赵丽娟，金鑫，赵宇迪，等.含夹矸煤层滚筒磨损特性离散元模拟试验分析[J].煤炭学报，2020，45（9）：3341-3350. ZHAO Lijuan, JIN Xin, ZHAO Yudi, et al. Discrete element simulation analysis on the wear characteristics of drum in coal seam with gangue[J]. Journal of China Coal Society, 2020, 45（9）: 3341-3350.
[19]	王虹，王步康，张小峰，等.煤矿智能快掘关键技术与工程实践[J].煤炭学报，2021，46（7）：2068-2083. WANG Hong, WANG Bukang, ZHANG Xiaofeng, et al. Key technology and engineering practice of intelligent rapid heading in coal mine[J]. Journal of China Coal Society, 2021, 46（7）: 2068-2083.

[1]	FU Xingyu, YU Huajiang, ZHANG Bin, GUO Zhongtuo, SUN Jianzhen, ZHAO Wenchao. Mechanism of Mining Rate Influencing Hard Roof Breaking Step in Fully-mechanized Caving Face in Thick Coal Seam[J]. Safety in Coal Mines, 2019, 50(8): 199-202,208.
[2]	SONG Ping, PANG Xinkun, LIU Baozhu. Behavior Laws of Mine Pressure of Steep Thick Coal Seam with Stagger Roadway Layout in Tangshan Mine[J]. Safety in Coal Mines, 2018, 49(12): 221-224.
[3]	HOU Zhicheng. Research on Strata Behavior Laws of “Hilt-shape” Fully Mechanized Working Face with 7 m Large Mining Height[J]. Safety in Coal Mines, 2017, 48(s1): 1-4.
[4]	CHEN Lei. Determination of Weighting Interval Based on Elastic Foundation Beam Model[J]. Safety in Coal Mines, 2017, 48(5): 49-52.
[5]	ZHANG Jijian, LIU Yingke, CUI Guanglei, ZHOU Fubao. Numerical Simulation of Gas Outburst due to Roof First Weighting at Fully Mechanized Caving Face[J]. Safety in Coal Mines, 2014, 45(11): 41-44.
[6]	DENG Xiaosong, ZHENG Wancheng, LI Yibo. Numerical Simulation of Stress Field and Damage Field for Mining Rock[J]. Safety in Coal Mines, 2014, 45(2): 25-28.
[7]	ZHANG En-qiang, CHENG Guo-feng, HAN Song, YUAN Hong-bin, WANG Jian. Application of Cusp Catastrophe Theory in the Research of Periodic Weighting Step in Shallow Seams[J]. Safety in Coal Mines, 2013, 44(8): 42-44.
[8]	HUANG Chang-guo, HUA Xin-zhu. Using Elastic Thin Plate Theory to Predict Main Roof Weighting Pace at Mining Face[J]. Safety in Coal Mines, 2013, 44(5): 206-209.
[9]	CHANG Gang, JIANG Zhen-quan, JIA Xue-mei, ZHANG Rui, SUN Qiang. Study on Roof Strata Behavior Laws of A Certain Coal Mine During Mining[J]. Safety in Coal Mines, 2012, 43(7): 38-41.
[10]	WU Quan-lin, LI An-min, ZHANG Lin-chong, ZHANG Lin-liang. The Analysis of Effect Regularity Between Advance Step Distance and Mining - induced Stress Distribution in Kilometer Deep Shaft Working Face[J]. Safety in Coal Mines, 2012, 43(6): 155-157.

Cited By

Cited by

Periodical cited type(13)

1.	王文才，赵婧雯，李建伟，张海龙. 浅埋近距离煤层群开采过程中上覆采空区自燃危险区预测研究. 安全与环境学报. 2024(03): 914-922 .
2.	叶正亮，尚博，胡冕，郭曦蔓，汪海涛. 浅埋煤层大采高工作面地表裂隙漏风研究. 中国煤炭. 2024(08): 72-77 .
3.	高艳忠，冯震，祁建建，张鹏. 大采高孤岛煤柱俯采工作面末采撤架综合防火技术实践. 煤炭技术. 2024(12): 161-165 .
4.	管隆刚，马会云，罗肖，贺圣林，张林江，郭军，王栋，樊世星. 小保当一号煤矿采空区垂直漏风规律研究. 陕西煤炭. 2023(02): 91-94+119 .
5.	李健威. 正压通风对浅埋煤层漏风影响及漏风综合治理技术研究. 煤炭科学技术. 2023(10): 155-162 .
6.	万磊，孙茂如，赵吉诚，蔡涤标，马守龙. 近距离煤层复杂采空区漏风规律及防控技术研究. 中国矿业. 2022(01): 114-120 .
7.	王昕，郭英，师童，王旭，魏高明，张超. 深部边远采区综放工作面俯斜开采煤自燃防控方法. 煤矿安全. 2022(05): 81-86 . 本站查看
8.	张敏. 工作面风速变化规律及拟合研究. 煤炭工程. 2022(S1): 148-151 .
9.	邢震. 浅埋厚煤层地表漏风对采空区煤自燃影响数值模拟研究. 工矿自动化. 2021(02): 80-87+103 .
10.	李永刚，张晓军. 麻家梁矿近距离煤层开采工作面漏风规律研究. 煤矿现代化. 2021(02): 135-137 .
11.	刘振华. 示踪气体在工作面漏风通道和漏风量测定的应用. 煤矿现代化. 2021(03): 145-147+150 .
12.	王宁，张海军. 浅埋深近距离煤层工作面漏风测定及防治技术. 煤炭科学技术. 2021(S2): 131-134 .
13.	黄海东. 浅埋藏复合采空区防灭火技术研究. 煤炭科学技术. 2021(S2): 174-178 .

Other cited types(6)

Get Citation

PDF

XML

Article views (37) PDF downloads (37) Cited by(19)

Turn off MathJax

Article Contents

Abstract

References

Mechanism of dust production during coal and rock cutting based on EDEM

Abstract

References

Related Articles

Cited by

Periodical cited type(13)

Other cited types(6)

Catalog

Mechanism of dust production during coal and rock cutting based on EDEM

Abstract

References

Related Articles

Cited by

Periodical cited type(13)

Other cited types(6)

Catalog

Export File

Citation

Format

Content