Research on numerical simulation technology of a commonly used yielding bolt

ZHANG Shuo; LIU Linsheng; LI Xiuming; YE Shoujie; LI Weiteng

Safety in Coal Mines > 2022 > 53(3): 156-161,169.

ZHANG Shuo, LIU Linsheng, LI Xiuming, YE Shoujie, LI Weiteng. Research on numerical simulation technology of a commonly used yielding bolt[J]. Safety in Coal Mines, 2022, 53(3): 156-161,169.

Citation:

ZHANG Shuo, LIU Linsheng, LI Xiuming, YE Shoujie, LI Weiteng. Research on numerical simulation technology of a commonly used yielding bolt[J]. Safety in Coal Mines, 2022, 53(3): 156-161,169.

Citation:

ZHANG Shuo, LIU Linsheng, LI Xiuming, YE Shoujie, LI Weiteng. Research on numerical simulation technology of a commonly used yielding bolt[J]. Safety in Coal Mines, 2022, 53(3): 156-161,169.

PDF (2612 KB)

Research on numerical simulation technology of a commonly used yielding bolt

More Information

Published Date: March 19, 2022

Graphical Abstract

Abstract

Abstract

Yielding bolt can effectively solve the problem of deep roadway bolt breakage, Y-bolt is one of the common types, but at present, there is a lack of effective numerical simulation technology in engineering application. By analyzing the characteristics of typical static tensile test curve, the tensile mechanical model of Y-bolt is established. The secondary development of built-in cable element in FLAC3D is carried out by using FISH, and the numerical model of Y-bolt is established, forming a complete numerical simulation technology. The numerical simulation of tensile test shows that when the axial force of the bolt reaches 168 kN, it enters the yielding stage, the elongation increases from 10.51 mm to 29.48 mm, and the axial force remains 168 kN, which is in good agreement with the indoor test results. The numerical simulation of deep buried roadway shows that the broken number of Y-bolt is 80% less than that of normal bolt, and the roof settlement and side wall internal displacement are reduced by 50.6 mm and 26.5 mm respectively.
- bolt suppor,
- tY-bolt,
- mechanical model,
- numerical simulation,
- roadway support

FullText(HTML)

References (18)

References

[1]	程良奎.岩土锚固研究与新进展[J].岩石力学与工程学报，2005，24（21）：3803-3811. CHENG Liangkui. Research and new progress in ground anchorage[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24（21）: 3803-3811.
[2]	何满潮，谢和平，彭苏萍，等.深部开采岩体力学研究[J].岩石力学与工程学报，2005，24（16）：2803-2813. HE Manchao, XIE Heping, PENG Suping, et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24（16）: 2803-2813.
[3]	蓝航，陈东科，毛德兵.我国煤矿深部开采现状及灾害防治分析[J].煤炭科学技术，2016，44（1）：39-46. LAN Hang, CHEN Dongke, MAO Debing. Current status of deep mining and disaster prevention in China[J]. Coal Science and Technology, 2016, 44（1）: 39-46.
[4]	何满潮.深部软岩工程的研究进展与挑战[J].煤炭学报，2014，39（8）：1409-1417. HE Manchao. Progress and challenges of soft rock engineering in depth[J]. Journal of China Coal Society, 2014, 39（8）: 1409-1417.
[5]	肖同强，李怀珍，徐营，等.深部构造应力区煤巷肩角锚杆破断机制及控制[J].岩土力学，2013（8）：2303. XIAO Tongqiang, LI Huaizhen, XU Ying, et al. Breaking mechanism of shoulder bolt of deep coal roadway in tectonic stress area and its control[J]. Rock and Soil Mechanics, 2013（8）: 2303.
[6]	连传杰，徐卫亚，王志华.一种新型让压管锚杆的变形特性及其支护作用机理分析[J].防灾减灾工程学报，2008，28（2）：242-247. LIAN Chuanjie, XU Weiya, WANG Zhihua. Analysis of deformation characteristic and supporting mechanism of a new-typed yielding anchor bolt[J]. Journal of Disaster Prevention and Mitigation Engineering, 2008, 28（2）: 242-247.
[7]	吴福宝，王梓芃，夏才初，等.让压锚杆让压管长度的解析设计方法[J].隧道建设（中英文），2019，39（1）：119-124. WU Fubao, WANG Zipeng, XIA Caichu, et al. Analytical design method for yielding pipe length of yielding bolt[J]. Tunnel Construction, 2019, 39（1）: 119-124.
[8]	朱兵兵，王世炫，肖跟健，等.让压锚杆让压管合理长度的确定[J].煤炭技术，2015，34（1）：57-59. ZHU Bingbing, WANG Shixuan, XIAO Genjian, et al. Determination of reasonable pressure anchor for pressure pipe length[J]. Coal Technology, 2015, 34（1）: 57.
[9]	朱彦.让压锚杆在深埋软岩隧洞中的作用机理及支护效应研究[D].青岛：山东科技大学，2017. ZHU Yan. Study on the action mechanism and supporting effect of yielding bolt in deep buried soft rock tunnel[D]. Qingdao: Shandong University of Science and Technology, 2017.
[10]	单仁亮，杨昊，钟华，等.让压锚杆能量本构模型及支护参数设计[J].中国矿业大学学报，2014，43（2）：241-247. SHAN Renliang, YANG Hao, ZHONG Hua, et al. Design of support parameters and energy constitutive model for yielding anchor bolt[J]. Journal of China University of Mining & Technology, 2014, 43（2）: 241-247.
[11]	连传杰，徐卫亚，王亚杰，等.新型高强预应力让压锚杆巷道支护性能的数值模拟[J].岩土力学，2010，31（7）：2329. LIAN Chuanjie, XU Weiya, WANG Yajie, et al. Numerical simulation of entry performance supported by a new high strength and high pretension yieldable bolts[J]. Rock and Soil Mechanics, 2010, 31（7）: 2329.
[12]	连传杰，韦立德，王阁.高预应力让压锚杆数值模拟方法研究[J].岩土工程学报，2008（10）：1437-1443. LIAN Chuanjie, WEI Lide, WANG Ge. Development of 3D numerical simulating methods for high prestressed yield bolts[J]. Chinese Journal of Geotechnical Engineering, 2008（10）: 1437-1443.
[13]	张小康，王连国，吴宇，等.高强让压锚杆支护效果数值模拟研究[J].采矿与安全工程学报，2008（1）：46. ZHANG Xiaokang, WANG Lianguo, WU Yu, et al. Numerical simulation of support with high-strength yielding bolt[J]. Journal of Mining & Safety Engineering, 2008（1）: 46.
[14]	志刚，冯井龙，等.软岩巷道“让压-支护”围岩控制技术与应用[J].煤矿开采，2014，19（4）：68-72. JIA Housheng, WANG Zhigang, FENG Jinglong, et al. Technology of yielding and supporting soft-rock roadway and its application[J]. Coal Mining Technology, 2014, 19（4）: 68-72.
[15]	张峰.高应力大采深煤巷锚杆支护系统协调性研究[D].青岛：山东科技大学，2009. ZHANG Feng. Study on bolt supporting system compatibility of mining roadway under large mining depth and heavily stress[D]. Qingdao: Shandong University of Science and Technology, 2009.
[16]	张彪.让压锚杆（索）在挤压型大变形地下硐室中的作用机理及应用研究[D].成都：西南交通大学，2014. ZHANG Biao. Study on the mechanism and application of yielding bolt in squeezing large deformation underground cavity[D]. Chengdu: Southwest Jiaotong University, 2014.
[17]	王阁.预应力让压锚杆的数值模拟研究及其应用[D].青岛：山东科技大学，2007. WANG Ge. Numerical simulation of pre-stressed yield bolt support and its application[D]. Qingdao: Shandong University of Science and Technology, 2007.
[18]	李为腾，杨宁，李廷春，等.FLAC3D中锚杆破断失效的实现及应用[J].岩石力学与工程学报，2016，35（4）：753-767. LI Weiteng, YANG Ning, LI Tingchun, et al. Implementation of bolt broken failure in FLAC3D and its application[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35（4）: 753-767.

[1]	DU Tianlin, JIANG Zaibing, ZHANG Jian, SHU Jiansheng, LI Guihong, MOU Quanbin, JIA Lilong. Gas extraction technology of staged fracturing with comb hole in soft seam floor[J]. Safety in Coal Mines, 2021, 52(1): 107-113.
[2]	ZHANG Bailin, LI Haojun, ZHANG Xinghua. Parameters Optimization for Hole Layout of Liquid CO₂ Phase-change Fracturing Technology Based on COMSOL Numerical Simulation[J]. Safety in Coal Mines, 2018, 49(9): 207-210.
[3]	ZOU Yongming. Experimental Study on Permeability Increasing Technique with CO₂ Phase Transition Fracturing in Coal and Gas Outburst Coal Seam[J]. Safety in Coal Mines, 2018, 49(3): 5-8.
[4]	HAN Ying, SHI Xiaohui, LEI Yun, SUN Liang, GUO Shan. Experimental Study on Increasing Coal Seam Permeability and Pre-drainage Gas by Liquid CO₂ Phase-transforming Fracture[J]. Safety in Coal Mines, 2017, 48(10): 17-20.
[5]	WANG Zilei. Experimental Study on Fracture Extension Range of Deep Hole Pre-splitting Coal Body by Carbon Dioxide Fracturing Device[J]. Safety in Coal Mines, 2017, 48(6): 24-27.
[6]	ZHANG Xule, LU Jianshou. Efficient Gas Drainage Technology Practice of Placing Screen Pipe in Borehole of Soft and Low Permeability Coal Seam[J]. Safety in Coal Mines, 2017, 48(1): 67-69,73.
[7]	WANG Siyi, LIU Yong, DONG Changle, ZHANG Yu. Application of Hole-protected Technology and Equipment with Screen Pipe in Shenhua Ningxia Coal Industry Group[J]. Safety in Coal Mines, 2015, 46(12): 151-153.
[8]	LOU Haihui, LIU Xiaofan, WEI Zhiqiang, ZHANG Xiaofang, CHEN Fadong. Improvements of Casing Protecting Hole Screen Pipe Complete Equipment in Coal Mine[J]. Safety in Coal Mines, 2015, 46(8): 77-79.
[9]	ZHAO Li-peng. Technology of Liquid Carbon Dioxide Deep Hole Blasting Enhancing Permeability in Coal Seam[J]. Safety in Coal Mines, 2013, 44(12): 76-78,81.
[10]	ZUO Jiang-hong. Deep-hole Pre-splitting Blasting Technology for High Gassy Deep Complex Geology Area and Low Permeability Coal Seam[J]. Safety in Coal Mines, 2013, 44(10): 69-71.

Cited By

Get Citation

PDF

XML

Article views (31) PDF downloads (10)

Turn off MathJax

Article Contents

Abstract

References

Research on numerical simulation technology of a commonly used yielding bolt

Abstract

References

Related Articles

Catalog

Research on numerical simulation technology of a commonly used yielding bolt

Abstract

References

Related Articles

Catalog

Export File

Citation

Format

Content