• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
Email Alert RSS
Advanced Search
WAN Feng, WANG Zhanling, ZHANG Hongqing, FAN Mingjian, YAN Shouqing, GUO Gangye. Research and application of pre-stressed continuous surrounding rock control technology[J]. Safety in Coal Mines, 2021, 52(11): 104-109.
Citation: WAN Feng, WANG Zhanling, ZHANG Hongqing, FAN Mingjian, YAN Shouqing, GUO Gangye. Research and application of pre-stressed continuous surrounding rock control technology[J]. Safety in Coal Mines, 2021, 52(11): 104-109.
shu

Research and application of pre-stressed continuous surrounding rock control technology

More Information
  • Published Date: November 19, 2021
    Graphical Abstract
    • Abstract
  • Pre-stressed continuous surrounding rock control technology was proposed to solve the problem of serious deformation and destruction of the return air lane of No. 5 working face of Ⅱ2-1 coal in Lingdong Mine. First of all, the mechanical model of the anchor bolt pre-stress transfer in the surrounding rock was established through theoretical analysis. Next, based on the geological conditions of Ⅱ2-1 coal surrounding rock, FLAC3D numerical simulation was used to analyze the prestress diffusion law under different preloads, and the effect of M5 steel strip on prestress diffusion was simulated. Finally, the designed prestressed continuous surrounding rock control plan is implemented on site. The results show that the prestresses can be superimposed on each other when the row spacing between the anchor rods is 900 mm × 900 mm, and the anchor rod pretension is above 100 kN. In addition to the surface protection function, M5 steel can further diffuse the prestress of the anchor rod. After reasonably reducing the size of the roadway cross section, using strong prestressed continuous control scheme of the “bolt+anchor cable+anchor net+M5 steel belt” can reduce the surrounding rock deformation of the coal roadway by more than 70%.
    • FullText(HTML)
    • References (21)
  • [1]
    康红普，徐刚，王彪谋，等．我国煤炭开采与岩层控制技术发展40ａ及展望[J]．采矿与岩层控制工程学报，2019，1（1）：013501.

    KANG Hongpu, XU Gang, WANG Biaomou, et al. Forty years development and prospects of underground coal mining and strata control technologies in China[J]. Journal of Mining and Strata Control Engineering, 2019, 1（1）: 013501.
    [2]
    王金华．我国煤巷锚杆支护技术的新发展[J]．煤炭学报，2007，32（2）：113－118.

    WANG Jinhua. New development of rock bolting technology for coal roadway in China[J]. Journal of China Coal Society, 2007, 32（2）: 113-118.
    [3]
    Jurell G. Investigation into the Failure of a prestressed rock anchor[J]. International Water Power and Dam Construction, 1985, 37（2）: 45-47.
    [4]
    Chen Guoqing, Chen Tuo, Chen Yi, et al. A new method of predicting the prestress variations in anchored cables with excavation unloading destruction[J]. Engineering Geology, 2018, 241: 109-120.
    [5]
    Liu Guoqing, Xiao Ming, Zhou Hao. Analysis of mechanical characteristics and anchoring mechanism of prestressed anchor cable in underground caverns[J]. Rock and Soil Mechanics, 2017, 38（1）: 439-446.
    [6]
    Wang Dasai, Liu Aiqing. Study on the performance of full-length pre-stressed anchor bolts[J]. Advanced Materials Research, 2013, 639-640: 765-769.
    [7]
    Li Chong, Cao Yue, Ma Zhanguo, et al. Support mechanism of short, thin and dense bolts anchored in full length to soft-rock roadway[J]. Electronic Journal of Geotechnical Engineering, 2014, 19: 10121-10132.
    [8]
    Wang Q, Pan R, Li S C, et al. The control effect of surrounding rock with different combinations of the bolt anchoring lengths and pre-tightening forces in underground engineering[J]. Environmental Earth Sciences, 2018, 77: 501.
    [9]
    张农，韩昌良，谢正正．煤巷连续梁控顶理论与高效支护技术[J]．采矿与岩层控制工程学报，2019，1（2）：48－55.

    ZHANG Nong, HAN Changliang, XIE Zhengzheng. Continuous beam roof control theory and high-efficiency support technology for coal roadways[J]. Journal of Mining and Strata Control Engineering, 2019, 1（2）: 48-55.
    [10]
    康红普，吴建星．锚杆托板的力学性能与支护效果分析[J]．煤炭学报，2012，37（1）：8－16.

    KANG Hongpu, WU Jianxing. Analysis on mechanical performance and supporting function of rock bolt plates[J]. Journal of China Coal Society, 2012, 37（1）: 8.
    [11]
    康红普，姜铁明，高富强．预应力锚杆支护参数的设计[J]．煤炭学报，2008，33（7）：721－726.

    KANG Hongpu, JIANG Tieming, GAO Fuqiang. Design for pretensioned rock bolting parameters[J]. Journal of China Coal Society, 2008, 33（7）: 721-726.
    [12]
    刘家成，赵玉成，何东旭，等．全长锚固预应力锚杆支护对巷道围岩应力影响规律研究[J]．煤炭技术，2015，34（9）：65－67.

    LIU Jiacheng, ZHAO Yucheng, HE Dongxu, et al. Study on law of stress of surrounding rock of tunnel influenced by length of anchor pre-stress suspension roof support[J]. Coal Technology, 2015, 34（9）: 65.
    [13]
    刘文伟．大断面松软巷道高强预应力锚杆支护技术[J]．煤，2020，29（4）：60－61.

    LIU Wenwei. High-strength pre-stressed bolt support technology for large-section soft roadway[J]. Coal, 2020, 29（4）: 60-61.
    [14]
    刘锦荣，姜鹏飞，张成宇，等．特厚顶煤大断面全煤巷道高预应力锚杆（索）支护机理及应用研究[J]．2016，42（5）：52－56，61.

    LIU Jinrong, JIANG Pengfei, ZHANG Chengyu, et al. Study on mechanism and application of highly prestreesed anchor bolt and cable support in large-section and full-seam roadway wisdom ultra-thick top coal[J]. 2016, 42（5）: 52-56, 61.
    [15]
    王晓卿，康红普，赵科，等．黏结刚度对预应力锚杆支护效用的数值分析[J]．煤炭学报，2016，41（12）：2999－3007.

    WANG Xiaoqing, KANG Hongpu, ZHAO Ke, et al． Numerical analysis of bonding stiffness for support effectiveness of pre-stressed bolts[J]. Journal of China Coal Society, 2016, 41（12）: 2999-3007.
    [16]
    黎海滨，谭捍华，袁维，等．剪切方向与锚杆倾向共面条件下的锚固机制研究[J/OL]．岩土力学，2020，41（Ｓ2）.DOI：10.16285/j.rsm.2020.0476.

    LI Haibin, TAN Hanhua, YUAN Wei, et al. The anchorage mechanism under the coplanar condition of shear direction and bolt inclination[J/OL]. Rock and Soil Mechanics, 2020, 41（S2）.DOI：10.16285/j.rsm.2020.0476.
    [17]
    宋洋，李永启，杜炎齐．节理岩体剪切蠕变作用下锚杆预应力损失规律研究[J/OL]．岩土力学，2020，41（Ｓ2）.DOI：10.16285/j.rsm.2020.0292.

    SONG Yang, LI Yongqi, DU Yanqi. Variation of prestress loss of anchor rods under shear creep of jointed rock mass[J/OL]. 2020, 41（S2）.DOI：10.16285/j.rsm.2020.0292.
    [18]
    刘泉声，雷广峰，彭星新，等．锚杆锚固对节理岩体剪切性能影响试验研究及机制分析[J]．岩土力学，2017，38（Ｓ1）：27－35.

    LIU Quansheng, LEI Guangfeng, PENG Xingxin, et al. Experimental study and mechanism analysis of influence of bolt anchoring on shear properties of jointed rock mass[J]. Rock and Soil Mechanics, 2017, 38（S1）: 27-35.
    [19]
    张进鹏，刘立民，刘传孝，等．基于预应力锚和自应力注的深部裂隙岩体锚注加固机制研究[J]．岩土力学，2020，41（11）：3651-3662.

    ZHANG Jinpeng, LIU Limin, LIU Chuanxiao, et al. Research on mechanism of bolt-grouting reinforcement for deep fractured rock mass based on prestressed anchor and self-stress grouting[J]. Rock and Soil Mechanics, 2020, 41（11）: 3651-3662.
    [20]
    支光辉，刘少伟，贺德印，等．松软破碎煤体钻封注一体化锚固实验研究[J]．煤炭学报，2021（7）：2268.

    ZHI Guanghui, LIU Shaowei, HE Deyin, et al. Experimental study on the integration of drilling-sealing-injection of soft and broken coal[J]. Journal of China Coal Society, 2021（7）: 2268.
    [21]
    弗洛林Ｂ Ａ．土力学原理（第一卷）[Ｍ]．北京：中国工业出版社，1965．
    • Related Articles

  • Related Articles

    [1]LIU Shuo, YANG Yuanwei, MOU Haipeng, GUO Tingwen, LI Baiyi, LI Jialong. Research on gel plugging and fire prevention technology for roadway excavation in residual coal re-mining area[J]. Safety in Coal Mines, 2024, 55(8): 88-96. DOI: 10.13347/j.cnki.mkaq.20231537
    [2]ZHANG Yunfeng. Grouting and plugging technology of in-seam borehole methane drainage[J]. Safety in Coal Mines, 2021, 52(10): 87-91.
    [3]QIN Yueping, CAO Zihao, GE Yong, CHENG Changhao, DU Gang. Study on Anti-seepage and Leakage-plugging Material of Coal Wall and Its Properties[J]. Safety in Coal Mines, 2020, 51(5): 27-31.
    [4]WANG Gang. Bag Sealing for Air Leakage in Coal Mining Face[J]. Safety in Coal Mines, 2019, 50(10): 74-78.
    [5]CAO Naifu. Division of Goaf Spontaneous Combustion “Three Zones” and Air Leakage Test in Sandaogou Coal Mine Fully Mechanized Mining Face[J]. Safety in Coal Mines, 2019, 50(6): 192-196.
    [6]NI Guangqing, XUE Xiaohui, ZHOU Bingchao, WANG Youguo. Study on Leakage Plugging Technology of CBM Drilling Under Complex Geological Conditions[J]. Safety in Coal Mines, 2018, 49(3): 72-74.
    [7]JIN Yongfei, LIU Yin, GUO Jun, YUE Ningfang, ZHENG Xuezhao. Effect of Plugging Air Leakage on Formation Laws of Coal Spontaneous Combustion Gaseous Products[J]. Safety in Coal Mines, 2018, 49(2): 15-18,22.
    [8]WANG Xu, WU Jianming, WANG Junfeng, ZHOU Chunshan. Preparation of New Mine-used Hydrogel and Its Performance Test About Air Leakage Plugging[J]. Safety in Coal Mines, 2015, 46(9): 27-30.
    [9]LIU Chao, ZHANG Hui-zheng, DONG Jun-jun. Experimental Research on a New Underground Material for Plugging Air Leakage[J]. Safety in Coal Mines, 2013, 44(11): 26-28,32.
    [10]YOU Wen-shun, ZHOU Ting-yang, LIU Zhong-quan, WANG Bing-shan. Leakage Detection and Sealing Technology for Thick Coal Seam Slice Mining in Rujigou[J]. Safety in Coal Mines, 2012, 43(S1): 55-57.

Catalog

    Get Citation
    PDF
    XML
    Article views (47) PDF downloads (17) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles
    Links

    辽公网安备 21049802000106号　辽ICP备11020636号-9

    Website Copyright © CCTEG Shenyang Research Institute

    Address：No. 11 Binhe Road, Fushun Economic Development Zone, Liaoning　Postal Code：113122

    Tel：024-56616988/56616881　Email：mkaq@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return