• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
GU Shuancheng, YANG Chaofan, WANG Pan, XUE Jiao. Determination of width of coal pillar plastic zone considering arch effect of coal-rock mass[J]. Safety in Coal Mines, 2021, 52(1): 177-183.
Citation: GU Shuancheng, YANG Chaofan, WANG Pan, XUE Jiao. Determination of width of coal pillar plastic zone considering arch effect of coal-rock mass[J]. Safety in Coal Mines, 2021, 52(1): 177-183.

Determination of width of coal pillar plastic zone considering arch effect of coal-rock mass

More Information
  • Published Date: January 19, 2021
  • In order to determine the maximum plastic zone width of coal pillar under the action of self-weight of overlying coal rock mass near the goaf, the method of combining theoretical derivation, numerical simulation and on-site monitoring was adopted. By considering the arching effect of overlying coal rock mass in the goaf, the elastic-plastic analysis of coal pillar was carried out. According to the engineering conditions of Yuhua Coal Mine, the ANSYS simulation mining depth was 500 m and 600 m, the mining height was 4 m, 5 m, 6 m and 7 m, and the maximum plastic zone of coal pillar in the roadway of Yuhua 2410 working face was monitored. The results show that the results of theoretical calculation, numerical simulation and field monitoring of the maximum plastic zone width of coal pillar are consistent. The theoretical formula of the maximum plastic zone width of coal pillar in medium mining height is given, which can provide the basis for the design of coal pillar width.
  • [1]
    剧锦茂.近距离煤层回采巷道过上覆采空区及煤柱支护技术研究[D].太原:太原理工大学,2018.
    [2]
    贾光胜,康立军.综放开采采准巷道护巷煤柱稳定性研究[J].煤炭学报,2002,27(1):6-10.

    JIA Guangsheng, KANG Lijun. Study on the chain pillar stability of the developing entry in longwall top-coal mining[J]. Journal of China Coal Society, 2002, 27(1): 6-10.
    [3]
    王涛,赵曦,宋宇鹏.厚煤层回采工作面区段煤柱的合理宽度支护特性分析与应用[J].矿业工程研究,2019, 34(2):35.

    WANG Tao, ZHAO Xi, SONG Yupeng. On reasonable width of section coal pillar in thick coal working face[J]. Mineral Engineering Research, 2019, 34(2): 35.
    [4]
    王平虎,陕建龙.晋城矿区残留煤复采工作面顶板及煤柱稳定性研究[J].煤炭科学技术,2017,45(8):37.

    WANG Pinghu, SHAN Jianlong. Study on roof and coal re-mining face in Jincheng Mining Area[J]. Coal Science and Technology, 2017, 45(8): 37-41.
    [5]
    柏建彪,侯朝炯,黄汉富.沿空掘巷窄煤柱稳定性数值模拟研究[J].岩石力学与工程学报,2004,23(20):3475-3479.

    BAI Jianbiao, HOU Chaojiong, HUANG Hanfu. Numerical simulation study on stability of narrow coal pillar of roadway driving along goaf[J]. Chinese Journal of Rock Mechanics and Engineering, 2004, 23(20): 3475-3479.
    [6]
    朱涛.极近距离煤层刀柱采空区下长壁开采矿山压力及其控制研究[D].山西:太原理工大学,2007.
    [7]
    王贵虎,洪武,唐述敏.复杂条件下沿空掘巷煤柱宽度的选择[J].煤矿安全,2007,38(6):36-37.

    WANG Guihu, HONG Wu, TANG Shumin. Selection of the width of coal pillar along empty roadway under complex conditions[J]. Safety in Coal Mines, 2017, 38(6): 36-37.
    [8]
    Bo WANG, Fuxing JIANG. Experimental study on the width of the reasonable segment pillar of the extremely soft coal seam in the deep mine[J]. Geotechnical and Geological Engineering, 2019, 37(6): 4947-4957.
    [9]
    孙学阳,夏玉成.采煤工作面内及区段间煤柱宽度的理论计算[J].西安科技大学学报,2008(1):19-22.

    SUN Xueyang, XIA Yucheng. Calculation of width of coal pillar at working face and stage coal pillar[J]. Journal of Xi’an University of Science and Technology. 2008(1): 19-22.
    [10]
    王旭春,黄福昌,张怀新,等.A H威尔逊煤柱设计公式探讨与改进[J].煤炭学报,2002,27(6):604-608.

    WANG Xuchun, HUANG Fuchang, ZHANG Huaixin. Discussion and improvement for A H Wilson’s coal pillar design[J]. Journal of China Coal Society, 2002, 27(6): 604-608.
    [11]
    张少杰,王金安,吴豪伟,等.综放开采合理护巷煤柱宽度研究[J].中国矿业,2012,21(3):52-55.

    ZHANG Shaojie, WANG Jinan, WU Haowei, et al. Study on coal pillar width of reasonable roadway protection in fully mechanized caving mining[J]. China Mining Industry, 2012, 21(3): 52-55.
    [12]
    谢广祥,王磊,常聚才.煤柱宽度对综放工作面巷道位移的影响规律[J].煤炭科学技术,2008,36(12):28-30.

    XIE Guangxiang, WANG Lei, CHANG Jucai. Influence law of coal pillar width to mining gateway displacement of fully mechanized top coal caving mining face[J]. Coal Science and Technology, 2008, 36(12):28-30.
    [13]
    刘增平,梁顺.深井沿空巷道窄煤柱宽度确定及支护设计[J].煤矿安全,2010(12):58-60.

    LIU Zengping, LIANG Shun. Determination of narrow pillar width and support design of deep well roadway along the goaf[J]. Safety in Coal Mines, 2010(12): 58-60.
    [14]
    Zhang L Y, Deng K Z, Zhu C G, et al. Analysis of stability of coal pillars with multi-coal seam strip mining[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(S3): 549-555.
    [15]
    张科学,姜耀东,张正斌,等.大煤柱内沿空掘巷窄煤柱合理宽度的确定[J].采矿与安全工程学报,2014, 31(2):255-262.

    ZHANG Kexue, JIANG Yaodong, ZHANG Zhengbin.etal. Determining the reasonable width of narrow pillar of roadway in gob entry driving in the large pillar[J]. Journal of Mining and Safety Engineering, 2014, 31(2):255-262.
    [16]
    韩承强,张开智,徐小兵,等.区段小煤柱破坏规律及合理尺寸研究[J].采矿与安全工程学报,2007,24(3):370.

    HANG Chengqiang, ZHANG Kaizhi, XU Xiaobing, et al. Stusy on failure regularity and reasonable dimension of district sublevel small coal pillar[J]. Journal of Mining and Safety Engineering, 2007, 24(3): 370.
    [17]
    吕晓波.采动应力影响条件下护巷煤柱留设尺寸研究[J].煤矿安全,2019,50(12):189-191.

    LYU Xiaobo. Study on retaining size of coal pillar in roadway under mining-induced stress[J]. Safety in Coal Mines, 2019, 50(12): 189-191.
    [18]
    Jaeger J C, Cook N G W, Zimmerman R W. Fundamentals of rock mechanics[M]. Britain: Blackwell Public, 2007: 342-355.
    [19]
    杨雪强,何世秀,庄心善.土木工程中的成拱效应[J].湖北工学院学报,1994,9(1):1-7.

    YANG Xueqiang, HE Shixiu, ZHUANG Xinshan. Arch effect in civil engineering[J]. Journal of Hubei Institute of Technology, 1994, 9(1): 1-7.
    [20]
    邱子义,韩同春,豆红强.桩后及桩侧土拱共同作用的抗滑桩桩间距分析[J].浙江大学学报(工学版), 2016,50(3):559.

    QIU Ziyi, HAN Tongchun, DOU Hongqiang. Analysis of spacing between anti-slide pile considering soil arch on lateral sides and back[J]. Journal of Zhejiang University(Engineering Science), 2016, 50(3): 559.
  • Related Articles

    [1]YANG Gengqun, WANG Jun, SUN Yongkang, CHEN Xianhui, LI Wenpu, WANG Tao. Research on roadside filling body materials and reasonable width of gangue concrete[J]. Safety in Coal Mines, 2024, 55(11): 166-175. DOI: 10.13347/j.cnki.mkaq.20231246
    [2]XUAN Zhaojun, XU Lei, XIANG Zheng, CAI Lingxiang, GUO Shuai, DAVIDE Elmo. Mechanical compression process of gangue filling and settlement analysis of wide strip rock stratum[J]. Safety in Coal Mines, 2024, 55(2): 125-132. DOI: 10.13347/j.cnki.mkaq.20222060
    [3]XIAO Bo, LI Yongliang, WANG Yuxuan, WANG Zixu. Experimental study on proportion optimization of gangue-based new solid filling materials[J]. Safety in Coal Mines, 2022, 53(3): 75-83.
    [4]LI Xinwang, ZHAO Xinyuan, CHENG Lichao, QIN Yiling. Experimental Study on Strength and Deformation Characteristics of Gangue Cemented Backfill Under Optimal Grading Conditions[J]. Safety in Coal Mines, 2020, 51(5): 78-82.
    [5]SUN Xikui, QIANG Hui, SHI Xianyuan, CHANG Qingliang. Mixture Ratio Optimization of Mine Gangue Paste Filling Materials[J]. Safety in Coal Mines, 2017, 48(10): 69-72,75.
    [6]HAN Yongbin. Roadway Gangue Back-filling Technology for Mining Under Village[J]. Safety in Coal Mines, 2014, 45(7): 80-82.
    [7]LI Xiang-yang, LIU Jin-liang, ZHAO Jing-li, LI You-jun. Filling Gelled Material Activation Technology of Coal Gangue[J]. Safety in Coal Mines, 2013, 44(4): 99-102.
    [8]LI Yan-Kui, JIN Rui, LI Gang, LI Xin. The Application of Underground Gangue Filling Technology in Xiaonan Coal Mine[J]. Safety in Coal Mines, 2012, 43(8): 155-156.
    [9]ZHANG Jun-liang, LUO Xin-rong. Study on the Mechanical Properties of Gangue Filling[J]. Safety in Coal Mines, 2012, 43(8): 37-40.
    [10]ZHANG Yu-chuan. Mining Research on Replacement Coal by Filling Gangue in Roadway of Coal Mine Underground[J]. Safety in Coal Mines, 2012, 43(5): 36-38.

Catalog

    Article views (22) PDF downloads (2) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return