• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
WANG Xuening, YAN Shuai, SONG Yuanba, ZHANG Tao, XU Bobiao. Study on Roughness Distribution Characteristics of Rock Fracture Surface Based on 3D Laser Scanner[J]. Safety in Coal Mines, 2019, 50(1): 62-66.
Citation: WANG Xuening, YAN Shuai, SONG Yuanba, ZHANG Tao, XU Bobiao. Study on Roughness Distribution Characteristics of Rock Fracture Surface Based on 3D Laser Scanner[J]. Safety in Coal Mines, 2019, 50(1): 62-66.

Study on Roughness Distribution Characteristics of Rock Fracture Surface Based on 3D Laser Scanner

More Information
  • Published Date: January 19, 2019
  • For a deeper understanding of the mechanism of rock failure, the failure loads of two groups of 24 cylindrical rock samples were measured by pressure and shear tests. Using a high precision 3D laser scanner to scan the fracture surface of the rock sample, the characteristics of fracture surface roughness distribution are respectively obtained after the compression failure and shear failure. The radius of curvature of cross section curve is obtained using statistical analysis. It reveals the correlation relationship between the curvature radius and roughness coefficient JRC, and the failure load of sandstone, respectively. The results show that the farther away from the load center, the smaller the JRC in uniaxial compression test. The curvature radius of the roughness curve has a linear positive correlation with JRC and the shear strength in the shear test.
  • [1]
    Barton N. Review of a new shear-strength criterion for rock joints[J]. Engineering Geology, 1974, 7(4): 287.
    [2]
    BYERLEE J. Friction of rocks[J]. Pure Applied Geophsics, 1978, 116(4/5): 615-626.
    [3]
    谢和平, Willian G Pariseau,王建锋,等.节理粗糙度系数的分形估算[J].宝石和宝石学杂志,1992(1):85-90.
    [4]
    黄达,谭清,黄润秋.高应力卸荷条件下大理岩破裂面细微观形态特征及其与卸荷岩体强度的相关性研究[J].岩土力学,2012(S2):7-15.
    [5]
    雷鹏.硬性接触型岩体结构面剪切特性及边坡稳定性分析[D].重庆:重庆大学,2014.
    [6]
    李海波,冯海鹏,刘博.不同剪切速率下岩石节理的强度特性研究[J].岩石力学与工程学报,2006,25(12):2435-2440.
    [7]
    周玉新,周志芳,王锦国,等.采场岩体边坡渗流的裂隙控渗特征[J].金属矿山,2005(4):53-55.
    [8]
    陈亚军,王家臣,常来山,等.节理岩体边坡渐进破坏的试验研究[J].金属矿山,2005(8):11-13.
    [9]
    郭保华.岩石裂隙面粗糙度参数关系分析[J].采矿与安全工程学报,2011,28(2):241-246.
    [10]
    王卫星,杨记明.一种基于图像处理的岩石裂隙粗糙度几何信息算法[J].重庆邮电大学学报(自然科学版),2010, 22(4):454-457.
    [11]
    TSE R, CRUDEN D M.Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1979, 16: 303-307.
    [12]
    吴月秀,刘泉声,刘小燕.岩体节理粗糙度系数与统计参数的相关关系研究[J].岩石力学与工程学报, 2011(S1):2593-2598.
    [13]
    徐永祥,陈磊,朱日宏,等.微小球面曲率半径的测量研究[J]. 仪器仪表学报,2006,27(9):1159-1162.
    [14]
    ODLING N E.Natural Fracture Profile.Fractal Dimension and Joint Roughness Coefficients[J]. Rock Mech, 1994, 27(3): 135-153.
  • Related Articles

    [1]SUN Xiaoming. Study on reasonable criterion of effective extraction radius based on desorption gas index[J]. Safety in Coal Mines, 2021, 52(2): 13-17.
    [2]SUN Zhuoyue, YANG Dong, PEI Yue, SUN Liuwei, MA Xiaomin. Determination of Drainage Effective Radius of CO2 Phase Transition Fracturing Based on Time-source Method[J]. Safety in Coal Mines, 2020, 51(3): 1-5,11.
    [3]YANG Shuai, LIU Xiaofei, ZHANG Chong, LIU Quanlin, GONG Changzhi. Numerical Solution of Effective Radius of Hydraulic Punching Based on Klinkenberg Effect[J]. Safety in Coal Mines, 2018, 49(6): 152-155.
    [4]XU Qingwei, WANG Zhaofeng, WANG Liguo. Study on Relation Between Effective Extraction Radius and Study Area Shape and Borehole Spacing[J]. Safety in Coal Mines, 2018, 49(4): 144-147.
    [5]WANG Binbin, YUE Gaowei, BI Wei. Influence Study on Coal Seam Drilling Damage Radius[J]. Safety in Coal Mines, 2017, 48(3): 21-24.
    [6]LIU Lingsheng, LIN Menglu, JIANG Zhong'an, JIANG Qunliang, JIANG Guangxin. Numerical Simulation of Coal Seam Water Injection Wetting Radius in Driving Face[J]. Safety in Coal Mines, 2017, 48(1): 28-31.
    [7]ZHANG Shujin, WEI Guoying, HUANG Zhipeng, LI Hui. Measurement Effective Drainage Radius of Borehole Based on“the Drainage and the Pressure Measurement”Pressure Dropped Method[J]. Safety in Coal Mines, 2015, 46(12): 8-10,14.
    [8]LIU Ting, LIN Baiquan, ZOU Quanle, SHEN Chunming, ZHANG Zhen, YANG Wei. Measurement of Effective Drainage Radius Based on Primitive Gas Content and Pressure for Slotted Drilling[J]. Safety in Coal Mines, 2014, 45(8): 8-11.
    [9]WU Lei, DAI Guang-long, YANG Zhi-lei. Experimental Study on Effective Extraction Radius for Bedding Hole[J]. Safety in Coal Mines, 2013, 44(5): 4-6.
    [10]WANG Zhao-feng, LI Yan-tao, XIA Hui-hui, TAN Rong-hui. Numerical Simulation on Effective Drainage Radius of Drill Hole Along Coal Seam Based on COMSOL[J]. Safety in Coal Mines, 2012, 43(10): 4-6.
  • Cited by

    Periodical cited type(4)

    1. 王志国,方博然,吴仪慧,张守印,石浩淏. 基于三维激光扫描的采场边壁粗糙度特性分析. 有色金属设计. 2024(04): 19-25+30 .
    2. 黄丹,肖子龙,汤文,金清平. 不同开度节理大理岩破裂过程与断裂面形貌特征研究. 工程地质学报. 2024(06): 2239-2249 .
    3. 王威. 基于数字技术的三维动画图像纹理实时渲染系统设计. 现代电子技术. 2022(04): 78-82 .
    4. 甘磊,马洪影,沈振中. 混凝土粗糙面形貌特征参数与节理粗糙度系数关系研究. 土木工程学报. 2022(07): 57-65 .

    Other cited types(0)

Catalog

    Article views (138) PDF downloads (1) Cited by(4)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return