• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
LIU Hui, GAO Guanlin. Influence of Technical Parameters of Nuts on Bolts Pretension[J]. Safety in Coal Mines, 2018, 49(12): 126-127,131.
Citation: LIU Hui, GAO Guanlin. Influence of Technical Parameters of Nuts on Bolts Pretension[J]. Safety in Coal Mines, 2018, 49(12): 126-127,131.

Influence of Technical Parameters of Nuts on Bolts Pretension

More Information
  • Published Date: December 19, 2018
  • The experiment of conversion efficiency of bolts tightening torque was carried out on site, the relation between installation torque and pre-tightening force was studied based on the different shapes, materials as well as damping filling modes. This experiment shows that: compared with the hexagon damping nuts, the nodular graphite nuts and the metal piece filling nuts respectively, the bolts with the square damping nuts, the malleable cast-iron nuts and the resin filling nuts require less installation torque to meet the equal pretension. Combining with the actual situation, the reasonable advices for improving the bolts pre-tightening force was given.
  • [1]
    康红普,林健,吴拥政,等.锚杆构件力学性能及匹配性[J].煤炭学报,2015,40(1):11-23.
    [2]
    康红普,王金华.煤巷锚杆支护理论与成套技术[M].北京:煤炭工业出版社,2007:83-86.
    [3]
    肖同强,柏建彪,杨峰康.高预紧力锚杆支护理论与技术发展现状[J].煤炭技术,2011,30(2):79-81.
    [4]
    王强,吴拥政.煤矿井下锚杆预紧力控制研究[J].煤炭科学技术,2011,39(1):29-32.
    [5]
    贾瑞荣,张剑,薛旭辉.减摩垫圈对提高锚杆预应力的实测研究[J].煤炭技术,2016,35(11):273-275.
    [6]
    付玉凯.锚杆杆尾扭矩与预紧力相互转化的影响因素研究[J].采矿与安全工程学报,2016,33(5):800.
    [7]
    郭金刚,刘玉田.锚杆及其附件对预紧力转化效能影响的试验研究[J].煤炭科学技术,2017,45(1):142.
    [8]
    李国彪.锚杆尾部螺纹加工精度对预应力影响的实验研究[J].煤炭学报,2011,36(11):1821-1825.
    [9]
    薛刚,杨发兵,王飞.高强预紧力影响因素分析研究[J].能源与环保,2017,39(12):282-285.
    [10]
    程蓬,康红普,鞠文君.锚杆杆尾螺纹力学性能的实验研究[J].煤炭学报,2013,38(11):1929-1933.
  • Related Articles

    [1]ZHANG Bailin, LI Haojun, ZHANG Xinghua. Parameters Optimization for Hole Layout of Liquid CO2 Phase-change Fracturing Technology Based on COMSOL Numerical Simulation[J]. Safety in Coal Mines, 2018, 49(9): 207-210.
    [2]LI Hankun, ZHU Feihao. Numerical Simulation of Coupling Charge Coefficient on Permeability Increasing Effect of Deep Hole Pre-splitting Blasting Based on ANSYS[J]. Safety in Coal Mines, 2018, 49(1): 226-229.
    [3]CHEN Bin, ZHAN Qinjian. Fracturing and Permeability Increasing Technology for Radial Well in Rapid Unconvering Coal of Shaft[J]. Safety in Coal Mines, 2017, 48(11): 76-79.
    [4]JIAO Xianjun, CAI Feng. Study on Intensified Permeability Improving Technology by Hydraulic Fracturing in Deep and Low Permeability Coal Seam[J]. Safety in Coal Mines, 2017, 48(10): 76-79.
    [5]LIANG Wenxu. Experimental Study on Point Hydraulic Fracturing in Low Permeability Coal Seam[J]. Safety in Coal Mines, 2017, 48(6): 44-47,51.
    [6]WANG Kaiwang. Analysis of Factors Influencing Crack Effect by High Pressure Air Blasting[J]. Safety in Coal Mines, 2017, 48(5): 184-186,190.
    [7]YUAN Dezhu, LI Xuechen. Determination of Reasonable Punching Coal Amount Through Hydraulic Flushing Permeability Increasing in Low Permeability Coal Seam[J]. Safety in Coal Mines, 2016, 47(9): 180-182.
    [8]WANG Kaide, NING Hongjin, WAN Chunxin, QIU Han, HOU Xingpeng, WANG Qingchao. Numerical Simulation on Distribution Laws of Water Injection Pressure and Permeability of Coal Seam[J]. Safety in Coal Mines, 2016, 47(5): 181-184.
    [9]LI Baofa, LIANG Wenxu, HU Gaojian, LI Jiangtao. Application of Hydraulic Fracturing Permeability Improvement Technology in Xing'an Coal Mine[J]. Safety in Coal Mines, 2015, 46(7): 159-162.
    [10]NING Zhi-yong, LI Sheng. Numerical Simulation on Gas Extraction Parameters Optimization in Soft and Low Permeability Coal Seam of Wuyang Coal Mine[J]. Safety in Coal Mines, 2012, 43(10): 1-3.

Catalog

    Article views (193) PDF downloads (0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return