• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
CHENG Liyuan, LI Wei. Tectonic Coal Matrix Compression Characteristics Based on Mercury Intrusion Method and Its Impact on Pore Structure[J]. Safety in Coal Mines, 2016, 47(2): 175-179.
Citation: CHENG Liyuan, LI Wei. Tectonic Coal Matrix Compression Characteristics Based on Mercury Intrusion Method and Its Impact on Pore Structure[J]. Safety in Coal Mines, 2016, 47(2): 175-179.

Tectonic Coal Matrix Compression Characteristics Based on Mercury Intrusion Method and Its Impact on Pore Structure

More Information
  • Published Date: February 19, 2016
  • In order to research the characteristics of the coal matrix compression (CMC) of tectonic coal at different deformation extents, the pressure-driven CMC of coal from Hancheng Coal Mine, Weibei Coalfield, was calculated by means of mercury intrusion method combined with gas adsorption (N2 and CO2) technique, and the effect of CMC on pore structure of tectonic coal was discussed. The results indicate that the CMC of coal is not necessarily increases with the increases of tectonic deformation. The variation of CMC may be the comprehensive results of factors including coal rank, micropore content and tectonic deformation. Coal compressibility has a significant effect on mercury pore volume when pressure is over 20 MPa. The mercury pore volume in the pore size range is from 6 to 100 nm after compressibility correction are higher than the results of N2 adsorption due to the different testing principles followed by these two testing methods. Increasing tectonic deformation shows a trend to decrease the effect of CMC on mercury pore volume.
  • [1]
    Hodot B B. 煤与瓦斯突出[M].北京: 中国工业出版社, 1966.
    [2]
    Cai Y D, Liu D M, Pan Z J, et al. Pore structure and its impact on CH4 adsorption capacity and flow capability of bituminous and subbituminous coals from Northeast China[J]. Fuel, 2013,103:258-268.
    [3]
    Li S, Tang D Z, Pan Z J, et al. Characterization of the stress sensitivity of pores for different rank coals by nuclear magnetic resonance resonance[J]. Fuel, 2013,111: 746-754.
    [4]
    Ju Y W, Li X S. New research progress on the ultrastructure of tectonically deformed coals[J]. Progress in Natural Science, 2009,19: 1455-1466.
    [5]
    Guo X Q, Yao Y B, Liu D M. Characteristics of coal matrix compressibility: An investigation by mercury intrusion porosimetry[J]. Energy & Fuels, 2014,28: 3673-3678.
    [6]
    Pan Z J, Connell L D. Modelling permeability for coal reservoirs: a review of analytical models and testing data[J]. International Journal of Coal Geology, 2012,92:1-44.
    [7]
    Hou Q L, Li H J, Fan J J, et al. Structure and coalbed methane occurrence in tectonically deformed coals[J]. Science China Earth Sciences, 2012, 55(11): 1755-1763.
    [8]
    Jiang B, Qu Z H, Wang G G X, et al. Effects of structural deformation on formation of coalbed methane reservoirs in Huaibei coalfield, China[J]. International Journal of Coal Geology, 2010,82: 175-183.
    [9]
    Pan J N, Hou Q L, Ju Y W, et al. Coalbed methane sorption related to coal deformation structures at different temperatures and pressures[J]. Fuel, 2012,102:760-765.
    [10]
    Ju Y W, Jiang B, Hou Q L, et al. Behavior and mechanism of the adsorption/desorption of tectonically deformed coals[J]. Chinese Science Bulletin, 2009, 54(1): 88-94.
    [11]
    Suuberg E M, Deevi S C, Yun Y. Elastic behavior of coals studied by mercury porosimetry[J]. Fuel, 1995,74: 1522-1530.
    [12]
    Mahamud M M. Textural characterization of active carbons using fractal analysis[J]. Fuel processing technology, 2006,87: 907-917.
    [13]
    Friesen W I, Mikula R J. Mercury porosimetry of coals: Pore volume distribution and compressibility[J]. Fuel, 1988,67: 1516-1520.
    [14]
    Li Y H, Lu G Q, Rudolph V. Compressibility and fractal dimension of fine coal particles in relation to pore structure characterization using mercury porosimetry[J]. Particle & Particle Systems Characterization, 1999,16: 25-31.
    [15]
    Xue G W, Liu H F, Li W. Deformed coal types and pore characteristics in Hancheng coalmines in Eastern Weibei coalfields[J]. International Journal of Mining Science and Technology, 2012,22:681-686.
    [16]
    Li W, Liu H F, Song X X. Multifractal analysis of Hg pore size distributions of tectonically deformed coals[J]. International Journal of Coal Geology, 2015,144-145: 138-152.
    [17]
    Toda Y, Toyoda S. Application of mercury porosimetry to coal[J]. Fuel, 1972,51: 199-201.
    [18]
    Okolo G N, Everson R C, Neomagus H W J P, et al. Comparing the porosity and surface areas of coal as measured by gas adsorption, mercury intrusion and SAXS techniques[J]. Fuel, 2015,141: 293-304.
    [19]
    Nelson J R, Mahajan O M, Walker Jr P L. Measurement of swelling of coals in origin liquids: a new approach[J]. Fuel, 1980,59:831-837.
    [20]
    Clarkson C R, Solano N, Bustin R M, et al. Pore structure characterization of North American shale gas reservoirs using USANS/SANS, gas adsorption, and mercury intrusion[J]. Fuel, 2013,103: 606-616.
    [21]
    Xu L J, Liu C L, Xian X F, et al. Compressibility of coal matter and coal pore[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 1999,157: 219-222.
    [22]
    Qu Z H, Wang G G X, Jiang B, et al. Experimental study on the porous structure and compressibility of tectonized coals[J]. Energy & Fuels, 2010,24: 2964.
  • Related Articles

    [1]LIAN Huiqing, YANG Yi, YANG Songlin, TANG Zhongyi, XU Bin, PEI Wenxian, WANG Rui, LI Qixing. Prediction of coal mine roof water damage based on micro-seismic monitoring technology[J]. Safety in Coal Mines, 2023, 54(5): 49-55.
    [2]YAN Wenchao, CUI Weixiong, DUAN Jianhua, CONG Lin, LIN Duibo. Application of well-hole combined micro-seismic technique in working face monitoring[J]. Safety in Coal Mines, 2021, 52(11): 95-99.
    [3]DAI Wenxiang, KONG Linghai, DENG Zhigang, ZHAO Shankun. Strata Behavior Regularity of Fully Mechanized Top Coal Caving Mining Face of Extra-thick Coal Seam Under Close Goaf[J]. Safety in Coal Mines, 2018, 49(12): 212-215,220.
    [4]ZHANG Feng, ZOU Yinhui, YANG Guiru. Analysis of Rock Burst Prevention Effect of Fully Mechanized Caving Face Passing Through Single Square Danger Zone[J]. Safety in Coal Mines, 2017, 48(4): 195-198.
    [5]WANG Tongxu, ZHANG Yang, QU Kongdian, MA Qiufeng. Initial Fracture Position of Stope Roof and Its Influence Factors[J]. Safety in Coal Mines, 2016, 47(6): 222-225.
    [6]HU Hao, NING Jianguo, WANG Jun, LI Guangbo, SHI Xinshuai. Numerical Simulation on Height of Water Flowing Fractured Zone Development in Overlying Rocks Under Hard Roof Coal Seam Group Mining[J]. Safety in Coal Mines, 2016, 47(5): 45-48.
    [7]NIE Baisheng, YUAN Shaofei, WANG Longkang, ZHANG Jinliang, SU Xiaoqiang. Roadway Roof Stability Analysis Based on Microseismic Monitoring Technology[J]. Safety in Coal Mines, 2016, 47(1): 178-180.
    [8]DU Taotao, CHEN Jianqiang, LAN Hang, YANG Guiru. Hard Roof Control and Engineering Practice for the First Fully Mechanized Caving Face[J]. Safety in Coal Mines, 2015, 46(12): 140-143.
    [9]SHI Jian-jun, SHI Hao-yu. Numerical Simulation Analysis of Roof Fracture Laws for Gob-side Entry Retaining[J]. Safety in Coal Mines, 2013, 44(9): 191-193,194.
    [10]FENG Xiao-jun, SHEN Rong-xi, CAO Xin-qi, WEI Ming-yao. Analysis of Hard Roof Fracture and Energy Conversion[J]. Safety in Coal Mines, 2012, 43(4): 150-153.

Catalog

    Article views (387) PDF downloads (0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return