• Chinese Core Periodicals
  • Chinese Core Journals of Science and Technology
  • RCCSE Chinese Authoritative Academic Journals
SUN Jian, HOU Hua-qiang, WANG Lian-guo. Determination of Stop Mining Line Rational Position at Fully Mechanized Mining Face[J]. Safety in Coal Mines, 2013, 44(3): 44-46,50.
Citation: SUN Jian, HOU Hua-qiang, WANG Lian-guo. Determination of Stop Mining Line Rational Position at Fully Mechanized Mining Face[J]. Safety in Coal Mines, 2013, 44(3): 44-46,50.

Determination of Stop Mining Line Rational Position at Fully Mechanized Mining Face

More Information
  • Published Date: March 19, 2013
  • The distribution laws of advanced support pressure and the deformation characteristics of coal-pillar at fully-mechanized mining face are analyzed by FLAC3D numerical simulation. On the basis, the stress distribution characteristics of surrounding rock mining roadway of mining area are analyzed. The results show that the rational stop mining position of working face is away from the main roadway of 76 m.
  • [1]
    陈科,柏建彪,胡忠超,等.超前支承压力对下山的影响分析及合理停采线位置确定[J].煤矿开采, 2011, 15(1): 35-37.
    [2]
    曹胜根,刘长友,韩强,等.综放面合理停采线位置的确定[J].矿山压力与顶板管理,1998(1):59-61.
    [3]
    张向阳,涂敏,徐乃忠.动压下底板大巷围岩应力分析及合理停采线研究[J].采矿技术,2006,6(3): 311-314.
    [4]
    梁兴旺,王连国,何兴华,等.沿空掘巷窄煤柱合理宽度的确定[J].矿业研究与开发,2008,27(2): 29-31.
    [5]
    刘彩平,王金安,侯志鹰.房柱式开采煤柱系统失效的模糊理论研究[J].矿业研究与开发,2008,28(1):8-12.
    [6]
    李洪武,李晋平,李海忠.合理动态停采线位置的确定[J].煤,1994,3(2):17-18.
    [7]
    陈炎光,陆士良.中国煤炭巷道围岩控制[M].徐州:中国矿业大学出版社,1994:100-103.
    [8]
    钱鸣高,石平五.矿山压力与岩层控制.徐州:中国矿业大学出版社[M],2003:70-72.
  • Related Articles

    [1]GUO Jing, SONG Yaobin, ZHAO Liding, MA Liyun. Research on Boundary Position Optimization for Very Close Vertical Distance Cross-mining Face and Surrounding Rock Stability of Floor Roadway[J]. Safety in Coal Mines, 2018, 49(7): 28-33.
    [2]QI Jie, LIU Bingliang. Measurement Analysis and Simulation Study on Advanced Ground Pressure Laws of Two Roadways at 22303 Working Face in Bulianta Coal Mine[J]. Safety in Coal Mines, 2017, 48(s1): 10-14.
    [3]MA Jianhong, HOU Chao, CHEN Yibo, LI Jianming. Namerical Simulation of Top Coal Movement Laws at Fully Mechanized Mining Face[J]. Safety in Coal Mines, 2016, 47(8): 216-218.
    [4]YANG Gangshuai, NING Jianguo, WANG Jun, SHI Xinshuai. Study on Reasonable Size of Coal Pillar at Large Mining Height Fully-mechanized Coal Caving Face in Ordos Region[J]. Safety in Coal Mines, 2016, 47(2): 66-68,72.
    [5]SUN Haiyang, WANG Lianguo, LU Yinlong, HUANG Yaoguang. Numerical Simulation and Parameter Optimization of Advance Anchor Bolt Support in Fault[J]. Safety in Coal Mines, 2015, 46(8): 205-208.
    [6]SUN Shaolong, ZHANG Jinwang. Distribution Law of Advanced Abutment Pressure of Gangue Backfilling Working Face[J]. Safety in Coal Mines, 2015, 46(8): 33-35.
    [7]CUI Shujiang. Actual Measurement for Reasonable Coal Pillar Width of Fully Mechanized Caving Face Stopping Line of Tashan Coal Mine[J]. Safety in Coal Mines, 2015, 46(3): 190-193.
    [8]ZHANG Chunlei, LI Fusheng, LIU Jinkai, ZHANG Shiqing, ZHAO Jianjian, XU Lifeng. Rational Alternate Research on Simultaneous Mining Faces in Lijiahao Close Distance Seams[J]. Safety in Coal Mines, 2014, 45(3): 38-41.
    [9]LIU Xiao, ZHA Wen-hua, LU De-chao, LIANG Xiao-chen. Distribution Laws of Abutment Pressure for Deep Fully-mechanized Top-coal Caving Face With Large Mining Height[J]. Safety in Coal Mines, 2013, 44(7): 47-49,53.
    [10]XIONG Li-jun, ZHA Wen-hua, LIU Xiao-hu. Numerical Simulation Analysis of Stress Distribution Characteristics in Large Mining Height Fully Mechanized Coal Face[J]. Safety in Coal Mines, 2013, 44(2): 75-77.

Catalog

    Article views (5801) PDF downloads (3) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return