- Chinese Core Periodicals
- Chinese Core Journals of Science and Technology
- RCCSE Chinese Authoritative Academic Journals
| Citation: |
SUN Yueming, WANG Yida, WU Fan, et al. Study on shear characteristics of straight joints of coal under different normal stress and shear rate conditions[J]. Safety in Coal Mines, 2024, 55（7）: 169−178. DOI: 10.13347/j.cnki.mkaq.20231391
|
The shear mechanical parameters of coal are important parameters for analyzing the deformation and stability of coal. In order to study the shear characteristics of straight joints of coal under different normal stress and shear rate conditions, the shear numerical simulation and laboratory test were carried out to study the influence of normal stress and shear rate on the shear characteristics of straight joints of coal. The results show that the shear strength of joints decreases with the increase of shear rate, and increases with the increase of normal stress. The higher the normal stress, the greater the influence of shear rate on the shear strength of joints. Shear stiffness is positively correlated with normal stress and negatively correlated with shear rate. When the shear rate reaches a certain value, the influence of shear stiffness is not obvious. The increase of shear rate makes the simulated joints more prone to shear slip, which is easy to cause coal and rock dynamic disasters. This phenomenon is more serious in high normal stress.
| [1] |
齐庆新,李一哲,赵善坤,等. 我国煤矿冲击地压发展70年:理论与技术体系的建立与思考[J]. 煤炭科学技术,2019,47(9):1−40.
QI Qingxin, LI Yizhe, ZHAO Shankun, et al. Seventy years development of coal mine rockburst in China: establishment and consideration of theory and technology system[J]. Coal Science and Technology, 2019, 47(9): 1−40.
|
| [2] |
王振. 煤岩瓦斯动力灾害分类的探讨及鉴别方法[J]. 煤矿安全,2017,48(6):176−179.
WANG Zhen. Discussion on classification and identification method for dynamic disasters of coal and rock[J]. Safety in Coal Mines, 2017, 48(6): 176−179.
|
| [3] |
徐超平,李贺,鲁义,等. 软煤瓦斯抽采钻孔失稳特性及控制技术研究现状[J]. 矿业安全与环保,2022,49(3):131−135.
XU Chaoping, LI He, LU Yi, et al. Research status of borehole instability characteristics and control technology for gas extraction in soft coal seam[J]. Mining Safety & Environmental Protection, 2022, 49(3): 131−135.
|
| [4] |
章梦涛,徐曾和,潘一山,等. 冲击地压和突出的统一失稳理论[J]. 煤炭学报,1991(4):48-53.
ZHANG Mengtao, XU Zenghe, PAN Yishan, et al. A united instability theory on coal (rock) burst and outburst[J]. Journal of China Coal Society, 1991(4): 48-53.
|
| [5] |
田世轩,郭保华,孙杰豪,等. 不同边界条件下剪切速率对类岩石节理剪切力学特性的影响[J]. 岩土力学,2023,44(2):541−551.
TIAN Shixuan, GUO Baohua, SUN Jiehao, et al. Effect of shear rate on shear mechanical properties of rock-like joints under different boundary conditions[J]. Rock and Soil Mechanics, 2023, 44(2): 541−551.
|
| [6] |
郑博文,祁生文,詹志发,等. 剪切速率对岩石节理强度特性的影响[J]. 地球科学与环境学报,2015,37(5):101−110.
ZHENG Bowen, QI Shengwen, ZHAN Zhifa, et al. Effect of shear rate on the strength characteristics of rock joints[J]. Journal of Earth Sciences and Environment, 2015, 37(5): 101−110.
|
| [7] |
夏才初,喻强锋,钱鑫,等. 常法向刚度条件下岩石节理剪切−渗流特性试验研究[J]. 岩土力学,2020,41(1):57−66.
XIA Caichu, YU Qiangfeng, QIAN Xin, et al. Experimental study of shear-seepage behaviour of rock joints under constant normal stiffness[J]. Rock and Soil Mechanics, 2020, 41(1): 57−66.
|
| [8] |
许江,瞿佳美,刘义鑫,等. 循环剪切荷载作用下充填物对结构面剪切特性影响试验研究[J]. 岩土力学,2019,40(05):1627−1637.
XU Jiang, QU Jiamei, LIU Yixin, et al. Influence of filling material on the behavior of joints under cyclic shear loading[J]. Rock and Soil Mechanics, 2019, 40(05): 1627−1637.
|
| [9] |
刘新荣,邓志云,刘永权,等. 峰前循环剪切作用下岩石节理损伤特征与剪切特性试验研究[J]. 岩石力学与工程学报,2018,37(12):2664−2675.
LIU Xinrong, DENG Zhiyun, LIU Yongquan, et al. An experimental study on the cumulative damage and shear properties of rock joints under pre-peak cyclic shear loading[J]. Chinese Journal of Rock Mechanics and Engineering, 2018, 37(12): 2664−2675.
|
| [10] |
杨小彬,周杰,宋义敏,等. 循环加载岩石界面滑移位移演化特征试验研究[J]. 煤炭学报,2019,44(10):3041−3048.
YANG Xiaobin, ZHOU Jie, SONG Yimin, et al. Evolution characteristics of sliding displacement of rock interface under cyclic loading[J]. Journal of China Coal Society, 2019, 44(10): 3041−3048.
|
| [11] |
李海波,冯海鹏,刘博. 不同剪切速率下岩石节理的强度特性研究[J]. 岩石力学与工程学报,2006,25(12):2435−2440.
LI Haibo, FENG Haipeng, LIU Bo. Study on strength behaviors of rock joints under different shearing deformation velocities[J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(12): 2435−2440.
|
| [12] |
夏才初,唐志成,宋英龙,等. 节理峰值剪切位移及其影响因素分析[J]. 岩土力学,2011,32(6):1654−1658.
XIA Caichu, TANG Zhicheng, SONG Yinglong, et al. Analysis of relationship between joint peak shear displacement and its influence factors[J]. Rock and Soil Mechanics, 2011, 32(6): 1654−1658.
|
| [13] |
李晓锋,李海波,夏祥,等. 类节理岩石直剪试验力学特性的数值模拟研究[J]. 岩土力学,2016,37(2):583−591.
LI Xiaofeng, LI Haibo, XIA Xiang, et al. Numerical simulation of mechanical characteristics of jointed rock in direct shear test[J]. Rock and Soil Mechanics, 2016, 37(2): 583−591.
|
| [14] |
刘婷婷,李建春,李海波,等. 剪切速率对平直充填节理的剪切力学特性影响研究[J]. 岩土力学,2017,38(7):1967−1973.
LIU Tingting, LI Jianchun, LI Haibo, et al. Influence of shearing velocity on shear mechanical properties of planar filled joints[J]. Rock and Soil Mechanics, 2017, 38(7): 1967−1973.
|
| [15] |
蒋宇静,张孙豪,栾恒杰,等. 循环载荷对岩石节理宏细观剪切特性影响的模拟研究[J]. 煤炭学报,2023,48(1):199−211.
JIANG Yujing, ZHANG Sunhao, LUAN Hengjie, et al. Numerical investigation on the effect on cyclic loading on macro-meso shear characteristics of rock joints[J]. Journal of China Coal Society, 2023, 48(1): 199−211.
|
| [16] |
尹乾,靖洪文,孟波,等. 恒定法向刚度条件下三维粗糙裂隙面剪切力学特性[J]. 岩石力学与工程学报,2020,39(11):2213−2225.
YIN Qian, JING Hongwen, MENG Bo, et al. Shear mechanical properties of 3D rough rock fracture surfaces under constant normal stiffness conditions[J]. Chinese Journal of Rock Mechanics and Engineering, 2020, 39(11): 2213−2225.
|
| [17] |
郝保钦,张昌锁,王晨龙,等. 岩石PFC2D模型细观参数确定方法研究[J]. 煤炭科学技术,2022,50(4):132−141.
HAO Baoqin, ZHANG Changsuo, WANG Chenlong, et al. Study on determination micro-parameters of rock PFC2D model[J]. Coal Science and Technology, 2022, 50(4): 132−141.
|
| [18] |
王涛,周炜波,徐大朋,等. 基于光滑节理模型的岩体水力压裂数值模拟[J]. 武汉大学学报(工学版),2016,49(4):500−508.
WANG Tao, ZHOU Weibo, XU Dapeng, et al. Numerical simulation of hydraulic fracturing of rock mass based on smooth joint model[J]. Engineering Journal of Wuhan University, 2016, 49(4): 500−508.
|
| [19] |
常柳明. 不同类型岩石破坏全过程力学特性试验及离散元模拟研究[D]. 淮南:安徽理工大学,2023.
|
| [20] |
钱希坤. 基于数值模拟的岩石动态变形与破坏机理研究[D]. 大连:大连理工大学,2023.
|
| [21] |
李泽栋. 岩石节理面强度弱化机制试验研究[D]. 武汉:湖北工业大学,2019.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: