| Citation: |
ZHANG Junhu, NIAN Jun, ZHAO Bo, et al. The influence of cutting roof parameters on stability of surrounding rocks under the condition of double cutting roof[J]. Safety in Coal Mines, 2024, 55（6）: 134−140. DOI: 10.13347/j.cnki.mkaq.20230078
|
Taking 4502 working face of Shaqu No.1 Coal Mine as an example, the influence of roof cutting parameters on the stability of surrounding rock is studied by means of theoretical analysis, numerical simulation and field measurement. The results show that: the double roof cutting can weaken the stress concentration phenomenon inside the solid coal wall, which is beneficial to the stability of the surrounding rock of the roadway, but the larger the height of the roof cutting, the larger the vertical displacement of the roadway roof, which is not conducive to the control of the roof deformation. A certain angle of the roof cutting is beneficial to the collapse of the roof in the mining area, but the larger the angle of the cut roof, the larger the peak stress concentration and the value of the sinking of the roadway roof, which increases the difficulty of the anchor cable reinforcement. The height and angle of the roof cutting should be selected moderately, and the optimum value is 13 m and 15° respectively, when the oblique length of slit is 13.5 m, the results of field measurement and numerical simulation are in good consistency.
| [1] |
何满潮,高玉兵,杨军,等. 无煤柱自成巷聚能切缝技术及其对围岩应力演化的影响研究[J]. 岩石力学与工程学报,2017,36(6):1314−1325.
HE Manchao, GAO Yubing, YANG Jun, et al. An energy-gathered roof cutting technique in no-pillar mining and its impact on stress variation in surrounding rocks[J]. Chinese Journal of Rock Mechanics and Engineering, 2017, 36(6): 1314−1325.
|
| [2] |
陈立军. 一次采全高综采工作面切顶卸压沿空留巷技术[J]. 煤炭工程,2020,52(8):60−63.
CHEN Lijun. Gob-side entry retaining technology in fully mechanized working face full-seam mining[J]. Coal Engineering, 2020, 52(8): 60−63.
|
| [3] |
杨红运,李勇,刘延保,等. 坚硬顶板切顶成巷结构演化与稳定控制机理[J]. 采矿与安全工程学报,2021,38(4):766−773.
YANG Hongyun, LI Yong, LIU Yanbao, et al. Structure evolution and stability control mechanism of hard-roof cutting for roadway retaining[J]. Journal of Mining & Safety Engineering, 2021, 38(4): 766−773.
|
| [4] |
杨军,付强,高玉兵,等. 切顶卸压无煤柱自成巷全周期围岩受力及变形规律[J]. 煤炭学报,2020,45(S1):87−98.
YANG Jun, FU Qiang, GAO Yubing, et al. Research on roof deformation laws and mechanism in a non-pillar mining method with entry automatically formed during the whole cycle[J]. Journal of China Coal Society, 2020, 45(S1): 87−98.
|
| [5] |
杨军,王宏宇,王亚军,等. 切顶卸压无煤柱自成巷顶板断裂特征研究[J]. 采矿与安全工程学报,2019,36(6):1137−1144.
YANG Jun, WANG Hongyu, WANG Yajun, et al. Fracture characteristics of the roof in gob-side entry retaining with roof cutting and pressure release[J]. Journal of Mining & Safety Engineering, 2019, 36(6): 1137−1144.
|
| [6] |
王文林,马赛. 大采高工作面复杂应力扰动下切顶卸压沿空留巷技术[J]. 煤炭工程,2020,52(4):33−37.
WANG Wenlin, MA Sai. Roof cutting gob-side entry retaining in high cutting face under complex stress disturbance[J]. Coal Engineering, 2020, 52(4): 33−37.
|
| [7] |
范晓龙. 切顶卸压无煤柱自成巷关键技术研究及应用[J]. 山东煤炭科技,2021,39(6):7−9.
FAN Xiaolong. Research and application of key technology of roof cutting and pressure relief and no coal pillar self-forming roadway[J]. Shandong Coal Science and Technology, 2021, 39(6): 7−9.
|
| [8] |
郝跃清. 杉木树煤矿切顶卸压沿空成巷无煤柱开采技术应用[J]. 当代化工研究,2021(12):94−95.
HAO Yueqing. Application of coal pillar-free mining technology in gob-side entry by roof cutting and pressure relief in Shanmushu Coal Mine[J]. Modern Chemical Research, 2021(12): 94−95.
|
| [9] |
杨军,魏庆龙,王亚军,等. 切顶卸压无煤柱自成巷顶板变形机制及控制对策研究[J]. 岩土力学,2020,41(3):989−998.
YANG Jun, WEI Qinglong, WANG Yajun, et al. Roof deformation mechanism and control measures of pillarless mining with gob-side entry retaining by roof cutting and pressure relief[J]. Rock and Soil Mechanics, 2020, 41(3): 989−998.
|
| [10] |
张国锋,何满潮,俞学平,等. 白皎矿保护层沿空切顶成巷无煤柱开采技术研究[J]. 采矿与安全工程学报,2011,28(4):511−516.
ZHANG Guofeng, HE Manchao, YU Xueping, et al. Research on the technique of no-pillar mining with gob-side entry formed by advanced roof caving in the protective seam in Baijiao Coal Mine[J]. Journal of Mining & Safety Engineering, 2011, 28(4): 511−516.
|
| [11] |
张磊. 切顶卸压自动成巷无煤柱开采技术应用分析[J]. 当代化工研究,2021(8):32−33.
ZHANG Lei. Application analysis of coal pillar-free mining technology in automatic roadway with roof cutting and pressure relief[J]. Modern Chemical Research, 2021(8): 32−33.
|
| [12] |
朱珍,何满潮,王琦,等. 柠条塔煤矿自动成巷无煤柱开采新方法[J]. 中国矿业大学学报,2019,48(1):46−53.
ZHU Zhen, HE Manchao, WANG Qi, et al. An innovative non-pillar mining method for gateroad formation automatically and its application in Ningtiaota coal mine[J]. Journal of China University of Mining & Technology, 2019, 48(1): 46−53.
|
| [13] |
刘红威,赵阳升,REN Tingxiang,等. 切顶成巷条件下采空区覆岩破坏与裂隙发育特征[J]. 中国矿业大学学报,2022,51(1):77−89.
LIU Hongwei, ZHAO Yangsheng, REN Tingxiang, et al. Characteristics of overburden failure and fracture development in gob of mining with gob-side entry formed by cutting roof[J]. Journal of China University of Mining & Technology, 2022, 51(1): 77−89.
|
| [14] |
王琼,郭志飚,欧阳振华,等. 碎石粒径对切顶成巷碎石帮承载变形特性的影响[J]. 中国矿业大学学报,2022,51(1):100−106.
WANG Qiong, GUO Zhibiao, OUYANG Zhenhua, et al. The influence of crushed rock size on bearing-deformation performance of gangue rib of gob-side entry retaining formed by roof fracturing[J]. Journal of China University of Mining & Technology, 2022, 51(1): 100−106.
|
| [15] |
盛奉天,张勇,魏文胜,等. 切顶参数对沿空留巷围岩稳定性的影响研究[J]. 矿业科学学报,2022,7(3):322−332.
SHENG Fengtian, ZHANG Yong, WEI Wensheng, et al. Influence of roof cutting parameters on stability ofsurrounding rock of gob-side entry retaining[J]. Journal of Mining Science and Technology, 2022, 7(3): 322−332.
|
| [16] |
陈上元,赵菲,王洪建,等. 深部切顶沿空成巷关键参数研究及工程应用[J]. 岩土力学,2019,40(1):332−342.
CHEN Shangyuan, ZHAO Fei, WANG Hongjian, et al. Determination of key parameters of gob-side entry retaining by cutting roof and its application to a deep mine[J]. Rock and Soil Mechanics, 2019, 40(1): 332−342.
|
| [1] | REN Peng, ZHOU You, AI Chang, LI Wei, ZHAO Ruhui, WANG Dongyu. Analysis on sliding mechanism of high steep slope creep zone in open-pit mine[J]. Safety in Coal Mines, 2023, 54(6): 170-175. |
| [2] | TIAN Guang, HAN Liu, SHU Jisen, YANG Ri. Influence of pore water pressure redistribution on slope stability of waste dump[J]. Safety in Coal Mines, 2021, 52(8): 239-242,247. |
| [3] | QIAO Zengjian, XU Yanbing, JIANG Haitao. Study on Stability of West Side Slope in Baoqing Open-pit Coal Mine[J]. Safety in Coal Mines, 2020, 51(10): 294-297. |
| [4] | FAN Kegong, JING Chunyuan, NIU Shengming, FAN Deli. Movement and Deformation Characteristics and Stability Analysis of Mining Slope at Different Inclination Angles[J]. Safety in Coal Mines, 2020, 51(3): 231-234. |
| [5] | YAN Jie, HUO Zhonggang. Study on Failure Mechanism and Numerical Simulation of Steep Slope Mining in Soft Rock Slope[J]. Safety in Coal Mines, 2019, 50(12): 219-222. |
| [6] | ZHAO Zhiyun, BAI Hao, ZHAO Ran. Contrastive Analysis of Slope Stability Based on Different Mining Directions[J]. Safety in Coal Mines, 2019, 50(1): 234-237. |
| [7] | ZHAO Zhiyun, ZHAO Ran, BAI Hao. Stability Analysis of Mining Slope Under Reverse Slope Mining[J]. Safety in Coal Mines, 2018, 49(8): 251-253,257. |
| [8] | WANG Sheng. Study on Slope Deformation Mechanism and Failure Mode for High Frequent Landslide[J]. Safety in Coal Mines, 2016, 47(12): 46-48,52. |
| [9] | WANG Sheng. Stability Analysis and Optimization Design for Down Dip Bedded Slope[J]. Safety in Coal Mines, 2016, 47(4): 229-231. |
| [10] | HUANG Yue-hua, WANG Dong-quan, YU Guang-yun. Study of Dynamic Impact on Slope Stability Under Coal Mining[J]. Safety in Coal Mines, 2012, 43(5): 23-25,29. |
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: