神东煤炭分公司机电设备EIP协议数据一致性检测系统

张亮

神东煤炭分公司机电设备EIP协议数据一致性检测系统

张亮

计量
- 文章访问数: 41
- HTML全文浏览量: 8
- PDF下载量: 20
出版历程
- 发布日期: 2023-06-19

Data consistency detection system of electromechanical equipment EIP protocol of Shendong Coal Branch

ZHANG Liang

摘要

摘要: 分析了国家能源集团神东煤炭分公司在煤矿智能化建设过程中发现的井下机电设备通信接口和协议不统一问题，提出了根据《神东煤炭分公司机电设备EIP通信协议标准》研发机电设备EIP通信协议标准合规性检验系统的需求；详细分析了协议标准的内容，研究了协议规约模块的结构化存储和程序化表达关键技术，并通过需求分析、架构设计、功能设计和系统试运行等关键过程完成了“神东煤炭分公司机电设备EIP协议数据一致性检测系统”的设计与实现。
- EIP协议 /
- 数据一致性 /
- 检测系统 /
- 煤矿智能化 /
- 工业互联网
Abstract: This paper analyzes the problem of disunity of communication interface and protocol of underground electromechanical equipment found in the process of intelligent construction of coal mine by Shendong Coal Branch of National Energy Group, and puts forward the requirement of developing the compliance inspection system of electromechanical equipment EIP communication protocol standard according to the EIP Communication Protocol Standard of Electromechanical Equipment of Shendong Coal Branch. The content of protocol standard is analyzed in detail, the key technologies of structured storage and programmed expression of protocol module are studied, and the design and implementation of “Shendong Coal Branch Electromechanical Equipment EIP Protocol Data Consistency Detection System” is completed through the key processes of demand analysis, architecture design, function design and system trial run.
- EIP protocol /
- data consistency /
- detecting system /
- intelligent coal mine /
- Industrial Internet

HTML全文

参考文献(19)

[1]	王虹, 申国建, 王腾.刮板输送机用阀控型液力偶合器技术现状和发展趋势[J].煤炭科学技术, 2019, 47(1): 11-17. WANG Hong, SHEN Guojian, WANG Teng. Technical status and development trend of valve controlled fluid couplings for scraper conveyor[J]. Coal Science and Te-chnology, 2019, 47(1): 11-17.
[2]	张旭辉, 张超, 杨文娟, 等.悬臂式掘进机可视化辅助截割系统研制[J].煤炭科学技术, 2018, 46(12): 21 -26. ZHANG Xuhui, ZHANG Chao, YANG Wenjuan, et al. Ｒesearch and development of visual auxiliary cutting system for cantilever roadheader[J]. Coal Science and Technology, 2018, 46(12): 21-26.
[3]	毛清华, 张旭辉, 马宏伟, 等.多传感器信息的悬臂式掘进机空间位姿监测系统研究[J].煤炭科学技术, 2018(12): 41-47. MAO Qinghua, ZHANG Xuhui, MA Hongwei, et al. Study on spatial position and posture monitoring system of boom-type roadheader based on multi sensor information[J]. Coal Science and Technology, 2018, 46(12): 41-47.
[4]	王国法, 张德生.煤炭智能化综采技术创新实践与发展展望[J].中国矿业大学学报, 2018(3): 459-467. WANG Guofa, ZHANG Desheng. Innovation practice and development prospect of intelligent fully mechanized technology for coal mining[J]. Journal of China University of Mining & Technology, 2018, 47(3): 459-467.
[5]	王国法, 王虹, 任怀伟, 等.智慧煤矿2025情景目标和发展路径[J].煤炭学报, 2018(2): 295-305. WANG Guofa, WANG Hong, ＲEN Huaiwei, et al. 2025 scenarios and development path of intelligent coal mine[J]. Journal of China Coal Society, 2018, 43(2): 295-305.
[6]	张科学, 李首滨, 何满潮, 等.智能化无人开采系列关键技术之一——综采智能化工作面调斜控制技术研究[J]. 煤炭科学技术, 2018(1): 139-149. ZHANG Kexue, LI Shoubin, HE Manchao, et al. Study on key technologies of intelligent unmanned coal mining series Ⅰ: study on diagonal adjustment control technology of intelligent fully-mechanized coal mining face[J]. Coal Science and Technology, 2018, 46(1): 139-149.
[7]	刘国鹏.Inter Control控制器在掘进机电控系统中的应用[J].工矿自动化, 2014(12): 89-92. LIU Guopeng. Application of Inter Control controller in electrical control system of roadheader[J]. Industrial and Mine Automation, 2014(12): 89-92.
[8]	王虹.综采工作面智能化关键技术研究现状与发展方向[J].煤炭科学技术, 2014(1): 60-64. WANG Hong. Development orientation and research state on intelligent key technology in fully-mechanized coal mining face[J]. Coal Science and Technology, 2014, 42(1): 60-64.
[9]	李隆, 廉自生.刮板输送机可控起动装置液压系统分析[J].煤炭技术, 2016, 35(3): 262-264. LI Long, LIAN Zisheng. Analysis of hydraulic system controlled start transmission on scraper conveyor[J]. Coal Technology, 2016, 35(3): 262-264.
[10]	JANNIS Tautz-Weinert, SIMON J Watson. Using SCADA Data for Wind Turbine Condition Monitoring: a Review[J]. IET Renewable Power Generation, 2017, 11: 382-394.
[11]	任春美.基于深度学习的采煤机截割部齿轮故障预测[J].机电工程, 2022, 39(8): 1061-1070. ＲEN Chunmei. Fault prediction of shearer cutting gear based on deep learning[J]. Journal of Mechanical ＆ Electrical Engineering, 2022, 39(8): 1061-1070.
[12]	FLOOK S D, LEEMING J J. Recent developments in longwall mining entry development,and room and pillar systems[J]. Gospodarka Surowcami Mineralnymi, 2008, 24(4): 11-23.
[13]	徐江奇.煤矿综采工作面采煤机智能开采技术应用试验研究[J].机械管理开发, 2022, 37(6): 154-155. XU Jiangqi. Application of intelligent mining technology for coal mining machine in coal mine comprehensive working face[J]. Mechanical Management and Development, 2022, 37(6): 154-155.
[14]	李波, 刘宾, 高明, 等.考虑任务协作的煤矿掘进配套多设备协同控制方法[J].机械与电子, 2022(10): 67-71. LI Bo, LIU Bin, GAO Ming, et al. Coal mine excavation supporting multi-equipment cooperative control method considering task cooperation[J]. Machinery & Electronics, 2022(10): 67-71.
[15]	张科学.综掘工作面智能化开采技术研究[J].煤炭科学技术, 2017(7): 106-111. ZHANG Kexue. Study on intelligent mining technology of fully-mechanized heading face[J]. Coal Science and Technology, 2017, 45(7): 106-111.
[16]	FIONA Mavroudis, LARS Pierburg. Smart Mining Creates New Openings in the Global Commodities Market[J]. Mining Report, 2017, 153(1): 59-68.
[17]	罗波, 王献云.采煤机振动信号采集和识别系统设计研究[J].煤炭技术, 2022(11): 206-209. LUO Bo, WANG Xianyun. Design and research on vibration signal acquisition and identification system of shearer[J]. Coal Technology, 2022(11): 206-209.
[18]	曹现刚, 陈瑞昊, 伍宇泽, 等.基于CNN-XGBoost的采煤机健康状态评估[J].煤炭技术, 2022(11): 99-102. CAO Xiangang, CHEN Ruihao, WU Yuze, et al. Health state assessment of coal shearer based on CNN-XGBoost[J]. Coal Technology, 2022(11): 99-102.
[19]	刘建翔.新型矿用掘进机自动化改造设计研究[J].能源与节能, 2022(10): 48-52. LIU Jianxiang. Automatic transformation design of new type of mining roadheaders[J]. Energy and Energy Conservation, 2022(10): 48-52.