基于切顶卸压技术的动压巷道力学响应破坏机制试验研究
Experimental study on mechanical response failure mechanism of dynamic pressure roadway based on roof cutting and pressure releasing technology
-
摘要: 针对动压巷道围岩变形速度快、变形量大、变形方式复杂等现状，采用现场测试及理论计算方法，设计了工作面端头顶板和采空区侧煤柱顶板水压致裂切顶卸压方案，分析了动压巷道悬臂梁超前支承压力及弧形三角板侧向支承压力破坏效应，研究了动压巷道叠加力学响应破坏机制，提出了小保当矿动压强顶弱帮巷道控制对策。结果表明：采取工作面端头顶板切顶卸压可有效控制回采帮变形；采取相邻采空区煤柱顶板切顶卸压可有效控制煤柱帮变形；回采帮及煤柱帮承载力与超前及侧向支承压力有关。结合具体巷道回采帮及煤柱帮变形破坏现状，确定了动压巷道切顶卸压方案；小保当矿二次动压强顶弱帮巷道，应采取切顶卸压-强帮护顶技术，保证工作面安全回采。Abstract: In this paper, according to the current situation of fast deformation, large deformation amount and complicated deformation method of surrounding rock in dynamic pressure roadway, using field test and theoretical calculation method, the hydraulic roof cracking and roof cutting of working face end and gob side coal pillar roof are designed. The failure effect of cantilever beam in advance bearing pressure and arc triangle plate lateral bearing pressure in dynamic pressure roadway is analyzed, the failure mechanism of superimposed mechanical response in dynamic pressure roadway is studied, and the control countermeasures of dynamic pressure roof weak wall roadway in Xiaobaodang Mine is proposed. The results show that the pressure of the roof at the end of the working face can be effectively reduced to control the deformation of the mining roof. Adopting the cutting and pressure relief of the coal pillar roof of the adjacent goaf can effectively control the deformation of the coal pillar. The bearing capacity of the mining side and coal pillar is related to the leading and lateral supporting pressure. Combined with the actual deformation and failure status of the concrete roadway mining side and coal pillar, the dynamic pressure roadway cutting and pressure relief plan is determined. Secondary dynamic pressure strong roof weak wall roadway of Xiaobaodang Mine should adopt cutting roof pressure relief-strong roof protection technology to ensure safe mining of working face.
-
-
[1] 王国法，吴兴利，庞义辉．千万吨矿井群安全高效可持续开发关键技术[J]．煤炭工程，2015，47（10）：1－4. WANG Guofa, WU Xingli, PANG Yihui. Key technology of safe, efficient and sustainable development in coal mine group with 1Mt capacity[J]. Coal Engineering, 2015, 47（10）: 1-4.
[2] 鞠金峰，许家林，王庆雄．大采高采场关键层“悬臂梁”结构运动型式及对矿压的影响[J]．煤炭学报，2011，36（12）：2115. JU Jinfeng, XU Jinlin, WANG Qingxiong. Cantilever structure moving type of key strata and its influence on ground pressure in large mining height workface[J]. Journal of China Coal Society, 2011, 36（12）: 2115.
[3] 单仁亮，原鸿鹄，孔祥松，等．厚硬顶板巷道稳定性影响因素及强帮支护研究[J]．煤炭科学技术，2018，46（1）：207－214. SHAN Renliang, YUAN Honghao, KONG Xiangsong, et al. Study on factors affected to stability of gateway with thick-hard roof and strong sidewall support[J]. Coal Science and Technology, 2018, 46（1）: 207-214.
[4] 马念杰，赵希栋，赵志强，等．深部采动巷道顶板稳定性分析与控制[J]．煤炭学报，2015，40（10）：2287. MA Nianjie, ZHAO Xidong, ZHAO Zhiqiang, et al. Stability analysis and control technology of mine roadway roof in deep mining[J]. Journl of China Coal Society, 2015, 40（10）: 2287.
[5] 孙利辉，杨贤达，张海洋，等．强动压松软煤层巷道煤帮变形破坏特征及锚注加固试验研究[J]．采矿与安全工程学报，2019，36（2）：232－239. SUN Lihui, YANG Xianda, ZHANG Haiyang, et al. Experimental study on deformation and failure characteristics of coal slab and roadway reinforcement with strong dynamic pressure in soft coal seam[J]. Journal of Mining and Safety Engineering, 2019, 36（2）: 232-239.
[6] 康红普，姜鹏飞，黄炳香，等．煤矿千米深井巷道围岩支护－改性－卸压协同控制技术[J]．煤炭学报，2020， 45（3）：845－864. KANG Hongpu, JIANG Pengfei, HUANG Bingxiang, et al. Roadway strata control technology by means of bolting-modification-destressing in synergy in 1 000 m deep coal mines[J]. Journl of China Coal Society, 2020, 45（3）: 845-864.
[7] 李家卓，张继兵，侯俊领，等．动压巷道多次扰动失稳机理及开采顺序优化研究[J]．采矿与安全工程学报，2015，32（3）：439. LI Jiazhuo, ZHANG Jibing, HOU Junling, et al. Multiple disturbance instability mechanism of dynamic pressure roadway and mining sequence optimization[J]. Journal of Mining and Safety Engineering, 2015, 32（3）: 439.
[8] 许兴亮，田素川，孟毅，等．动压软岩巷道围岩破坏机理及强化技术研究[J]．煤炭工程，2018，50（9）：39. XU Xingliang, TIAN Suchuan, MENG Yi, et al. Study on failure mechanism and strengthening technology of soft rock roadway under dynamic pressure[J]. Coal Engineering, 2018, 50（9）: 39.
[9] 陈上元，何满潮，王洪建，等．深井沿空切顶巷道围岩协同控制及应力演化规律[J]．采矿与安全工程学报，2019，36（4）：660－669. CHEN Shangyuan, HE Manchao, WANG Hongjian, et al. Coordination control and stress evolution of surrounding rock of gob-side entry retaining cutting roof in deep mine[J]. Journal of Mining and Safety Engineering, 2019, 36（4）: 660-669.
[10] 杨健．水力压裂切顶卸压技术在王坡煤矿的应用[J]．煤炭工程，2019，51（Ｓ1）：64－67. YANG Jian. Application of hydraulic fracturing roof cutting and pressure relief technology in Wangpo Coal Mine[J]. Coal Engineering, 2019, 51（S1）: 64-67.
[11] 高晓君．深部煤巷围岩裂化破坏特征及控制技术研究[D]．徐州：中国矿业大学，2019． -
期刊类型引用(3)
1. 宋建民，邹永洺. 基于EGF增渗材料的煤层酸化增透技术研究. 煤矿安全. 2023(05): 161-168 . 
本站查看
2. 韩培壮，高亚斌，王飞，向鑫，郭晓亚. 圆锥形喷嘴出口直径对水射流冲击动力特性的影响研究. 中国安全生产科学技术. 2022(07): 75-80 . 百度学术
3. 刘文川，汤积仁，张慧栋，李怡静. 过热液体闪沸喷射钻进羽流相互作用调控及成孔直径预测. 煤炭学报. 2022(09): 3270-3283 . 百度学术
其他类型引用(2)
计量
- 文章访问数: 47
- HTML全文浏览量: 0
- PDF下载量: 22
- 被引次数: 5
下载:
