王蔚鸣,张超. 水力压裂钻孔抗高压封孔材料研发及带压封堵特征研究[J]. 煤矿安全,2024,55(4):1−8. doi: 10.13347/j.cnki.mkaq.2024.08.001
    引用本文: 王蔚鸣,张超. 水力压裂钻孔抗高压封孔材料研发及带压封堵特征研究[J]. 煤矿安全,2024,55(4):1−8. doi: 10.13347/j.cnki.mkaq.2024.08.001
    WANG Weiming, ZHANG Chao. Research and development of anti-high pressure sealing material and sealing characteristics in hydraulic fracturing borehole[J]. Safety in Coal Mines, 2024, 55(4): 1−8. doi: 10.13347/j.cnki.mkaq.2024.08.001
    Citation: WANG Weiming, ZHANG Chao. Research and development of anti-high pressure sealing material and sealing characteristics in hydraulic fracturing borehole[J]. Safety in Coal Mines, 2024, 55(4): 1−8. doi: 10.13347/j.cnki.mkaq.2024.08.001

    水力压裂钻孔抗高压封孔材料研发及带压封堵特征研究

    Research and development of anti-high pressure sealing material and sealing characteristics in hydraulic fracturing borehole

    • 摘要: 为解决由封孔难制约水力压裂卸压增透技术的井下现场应用难题,在总结国内外抗高压封孔材料及封孔方法的基础上,通过系统性基础实验,探究了普通水泥添加特种复合水泥、膨胀剂和减水剂等辅助材料对抗高压封孔材料的凝结时间、流动性、抗压强度以及膨胀倍率等基础性能的影响规律。研究表明:抗高压封控材料最佳水灰比为0.5,特种复合水泥添加量为20%~25%,复合膨胀剂添加量为4%,萘系减水剂添加量为1.6%时,抗高压封孔材料在保障流动度及膨胀倍率前提下呈现早强高强特性。为验证新材料性能,于龙煤集团平岗煤矿进行现场工业性实验,其凝固时间及抗压强度等参数均达到性能要求。

       

      Abstract: In order to solve the downhole field application problem of hydraulic fracturing technology which is restricted by the difficulty of sealing holes, in this paper, on the basis of summarizing the existing hole sealing materials and sealing methods at home and abroad, through a large number of basic experiments, the influence of auxiliary materials such as ordinary cement added with special composite cement, swelling agent and water reducing agent on the basic properties of anti-high pressure sealing materials such as setting time, fluidity, compressive strength and swelling multiplication rate was studied. The best water-cement ratio of 0.5, 20%-25% of special composite cement, 4% of compound expander and 1.6% of naphthalene water reducer were determined to ensure the early strength and high strength of the anti-high-pressure sealing material with the premise of flowability and expansion rate. It also conducted on-site industrial experiments in Pinggang Coal Mine of Longmei Coal Group, and its parameters such as solidification time and compressive strength met the performance requirements.

       

    /

    返回文章
    返回