Abstract: In view of the difficulty of realizing remote control logic and the shortcomings of untimely control execution between all measuring points in the underground coal mine area and the regional control equipment, the system platform of the regional control equipment based on the whole network communication with the ground center station is proposed to realize the design scheme of the remote control logic which can be arbitrarily configured. The design scheme uses the transmission control protocol as the communication of control logic conditions and control execution commands, which will be configured and issued by the remote control function block of the ground center station, and the regional control equipment stores the remote control logic sequence, through the user data protocol to broadcast the measurement point data control status, the regional control equipment completes remote control and executes the command to issue the actuator. At the same time, the remote control logic judgment of the design plan no longer depends on the ground central station, and will be independent of the underground coal mine area control equipment to make preset logic judgments and initiate execution orders.