芦岭煤矿8<sup>#</sup>煤顶分层Ⅱ884-1掘进工作面局部防突措施参数考察

芦岭煤矿8^#煤顶分层Ⅱ884-1掘进工作面局部防突措施参数考察

摘要: 根据矿井瓦斯地质条件及采掘技术特点,考察了芦岭矿8^#煤顶分层Ⅱ884-1掘进面的局部防突合理化参数。通过钻孔流量法和防突效果检验法,确定出煤巷掘进直径7φ5 mm的超前排放钻孔有效影响半径为1.2 m。通过改进巷帮钻场及钻孔的相关参数,提高了掘进速度,掘进过程均未出现瓦斯浓度超限及突出情况,说明该煤巷局部防突技术措施取得了很好的效果,实现了突出煤巷安全快速掘进。
- 掘进工作面 /
- 局部防突 /
- 高效掘进
Abstract: According to the gas geological condition of the coal mine, the rational parameters of local outburst prevention were investigated at II 884-1 driving face of No.8 top slice in Luling coal mine. By using the borehole flow method and outburst prevention effect test method, it determined the effective influence radius of advanced emission drilling with roadway driving diameterφ75 mm, which was 1.2 m.Through improving the relevant parameters of tunnel wall drilling place and borehole,driving speed was raised, there was no gas concentration overrun and outburst in the driving process. It indicated that the local prevention measures for the coal roadway had yielded very good results, achieved rapid excavation safely in outburst coal roadway.
- driving face /
- local outburst prevention /
- high efficient excavation

[1]	程远平,付建华,俞启香.中国煤矿瓦斯抽采技术的发展[J].采矿与安全工程学报,2006,36(2):127-139.
[2]	李伟.淮北矿业集团瓦斯灾害治理综述[J].煤炭科学技术,2008,36(1):31-34.
[3]	聂政.淮北煤田区域性防治煤与瓦斯突出对策[J].煤炭科学技术,2008,36(4):54-57.
[4]	程远平,付建华,俞启香.中国煤矿瓦斯抽采技术的发展[J].采矿与安全工程学报,2009,26(2):129-139.
[5]	马丕梁,蔡成功.我国煤矿瓦斯综合治理现状及发展战略[J].煤炭科学技术,2007,35(12):7-11,16.
[6]	邵景忠.区域性防治瓦斯突出措施-保护层的分类、作用原理及应用[J].煤炭技术,2008,27(6):91-92.
[7]	刘金海,冯涛,谢东海.煤层突出危险性预测的可拓方法[J].湖南科技大学学报:自然科学版,2008,23(3):28-31.
[8]	胡宝军.石门揭煤综合防治突出技术[J].矿业安全与环保,2004,31(4):56-57.
[9]	袁亮.高瓦斯矿区复杂地质条件安全高效开采关键技术[J].煤炭学报,2006,31(2):174-178.
[10]	袁亮.淮南矿区现代采矿关键技术[J].煤炭学报,2007,32(1):8-12.