基于能量源-能量耗散理论的突出煤层最优掘进速度判定

    Decision Method of Optimum Driving Speed in Outburst Coal Seam Based on Energy Source and Energy Dissipation Theory

    • 摘要: 以南山矿某工作面为例,对不同工作面掘进速度下的前方煤体内应力状态、煤体的透气性及瓦斯压力(或梯度)分布的变化规律进行了分析,并给出了各参数与距工作面距离的函数关系。最后依据分析结果,利用能量源-能量耗散理论对南山矿某工作面不同掘进速度下的突出危险性进行了判定,给出了安全合理的掘进方案,并取得了成功。研究结果表明:随着工作面掘进速度的提高,前方煤体内的峰前区减小、应力集中系数增加、煤壁附近煤体透气性增强、高透气性区域减小、前方煤体内瓦斯压力梯度增加、低瓦斯压力(或低瓦斯含量)区域减小,煤层突出危险性增强。

       

      Abstract: Taking a working face of Nanshan Mine for an example, the stress state in front coal body, the permeability of coal body and the change rule of gas pressure (or gradient) distribution under the heading speed of different working faces are analyzed, and the functional relations between the parameters and distance from working face were provided. Finally, based on the analysis results, the risk of outburst for a working face of Nanshan Mine was determined by the energy source and energy dissipation theory, and the safe and reasonable tunneling scheme was provided, and the scheme was successful. The results show that with the increase of driving speed, the pre-peak region decreases, the stress concentration factor increases, the permeability near the coal wall increases, the region with high permeability decreases, the gas pressure gradient in the front coal increases, the region with low gas pressure (or content) decreases, and the risk of outburst increases.

       

    /

    返回文章
    返回