基于ＩＳＰ的矿用传感器在线升级技术

Online Upgrading Technology for Mine-used Sensor Based on ISP Technology

摘要: 矿用传感器一般安装在条件比较苛刻的工作面,由于前期程序BUG和后期业务功能的增删,需要不断的更新程序。传统的方法在地面更新程序,然后到井下更换主板,这种方法费时费力。针对这一问题,研究了ISP在线升级技术,以ARM处理器的存储Flash为载体,前部分存储ISP在线升级代码,后部分存储矿用传感器需要更新的程序,实现了在井下对矿用传感器进行在线升级目的。
- 安全监测系统 /
- 矿用传感器 /
- ISP技术 /
- IAP技术 /
- ARM处理器 /
- 动力灾害
Abstract: Mine sensors are usually installed in the working conditions with relatively strict conditions. Due to the addition and deletion of later business functions and early application bugs, we need to constantly update the procedures. The traditional method updates the program on the ground, and then changes the motherboard underground. This method takes time and effort. In order to solve this problem, the ISP online upgrading technology is studied. The storage Flash of the ARM processor is used as the carrier, the former part stores ISP online upgrade code, and the later part stores the program that the mine-used sensors need to be updated. The goal of online upgrading of mine sensor is realized.
- safety monitoring system /
- mine-used sensor /
- ISP technology /
- IAP technology /
- ARM processor /
- dynamic disaster

[1]	姚文详.ARM Cortex-M3权威指南[M].北京:北京航空航天大学出版社,2009.
[2]	徐永刚,庞亚杰,黄鑫,等.矿用传感器检定系统设计[J].煤矿安全,2016,47(10):97-100.
[3]	杨恒新,鲁翠侠.ISP技术在单片机程序升级中的应用[J].信息化研究,2007,33(3):55-58.
[4]	向文芳,邢涛,曹红兵,等.高速度数据采集系统的USB接口设计[J].计算机测量与控制,2011,19(10):2567-2570.
[5]	姜雪莲,司徒忠.基于单片机的嵌入式U盘控制器的设计与实现[J].机电工程技术,2005,34(4):79-81.
[6]	许双燕,石江宏.USB主机控制器的设计[J].电子设计工程,2010,18(1):35-37.
[7]	吴兴中,欧青立.一种PC与单片机多机RS232串口通信设计[J].国外电子测量技术,2009,28(1):74.
[8]	贾亚勤,徐洁.基于嵌入式系统的可自动加载软件版本的BOOT设计[J].软件导刊,2008(7):15-17.
[9]	龚智,赵翠,徐林杰,等.基于LPC1788微处理器USB驱动和应用程序设计[J].电脑编程技巧与维护,2017(1):13-15.
[10]	赵明松.关于IAP技术的在STM32在线升级的探讨[EB/OL].(2014-07-15)[2018-06-10].