• 中文核心期刊
  • 中国科技核心期刊
  • RCCSE中国核心学术期刊

大倾角工作面顶板结构特征及支架阻力确定

丘富旺, 杨东旭

丘富旺, 杨东旭. 大倾角工作面顶板结构特征及支架阻力确定[J]. 煤矿安全, 2017, 48(8): 227-230.
引用本文: 丘富旺, 杨东旭. 大倾角工作面顶板结构特征及支架阻力确定[J]. 煤矿安全, 2017, 48(8): 227-230.
QIU Fuwang, YANG Dongxu. Roof Structure Characteristics and Support Resistance Determination of Working Face with Large Dip Angle[J]. Safety in Coal Mines, 2017, 48(8): 227-230.
Citation: QIU Fuwang, YANG Dongxu. Roof Structure Characteristics and Support Resistance Determination of Working Face with Large Dip Angle[J]. Safety in Coal Mines, 2017, 48(8): 227-230.

大倾角工作面顶板结构特征及支架阻力确定

Roof Structure Characteristics and Support Resistance Determination of Working Face with Large Dip Angle

  • 摘要: 针对大倾角煤层采场围岩难以控制这一难题,以3313工作面为背景,理论分析了工作面倾斜方向上采场顶板结构,采用FLAC3D数值软件分析了不同推进距离下工作面矿压显现规律,结合采场顶板结构特征对支架工作阻力进行了计算。研究表明:上端头顶板首先产生拉剪破坏,导致沿倾向由下至上可划分为稳定区、弯曲下沉区和易失稳区;工作面上部应力集中系数为1.95,中部应力集中系数为1.88,下部应力集中系数为1.74,工作面中上部矿压显现剧烈;顶板来压时工作面支架工作阻力呈现出上部>中部>下部的规律,并确定了支架工作阻力为6 000 kN。
    Abstract: In view of the difficulty of stope surrounding rock, taking 3313 working face as background, the stope roof structure is analyzed through theoretical study and the mine pressure behavior laws of 3313 working face are analyzed by using FLAC3D. What’s more, combined with the features of stope roof structure, the support capacity is calculated. The result shows that: considering the early failure of upper beam and dip angle of coal seam, the work face can be divided into solid filling zone, surrounding stable zone and bending subsidence zone and instability zone; the stress concentration coefficient of the upper part, middle part and bottom part working face is 1.95, 1.88 and 1.74, respectively, which indicates the mine pressure behavior of upper-middle part working face is severe; when roof weighting appears, the support working resistance of upper part working face is larger than that in the middle part and the support working resistance of middle part of working face is larger than that in the bottom, besides, the support capacity of 6 000 kN is determined.
  • [1] 伍永平,员东风,张淼丰.大倾角煤层综采基本问题研究[J].煤炭学报,2000,25(5):465-468.
    [2] 李慧平,蒲文龙,郭守泉.浅谈大倾角煤层优化开采技术方向[J].煤矿开采,2005,10(1):20-22.
    [3] 王玮,张阳阳,张磊,等.破碎底板条件下大倾角工作面综采设备稳定性技术[J].煤矿安全,2014,45(10):62-64.
    [4] 吴鑫.大倾角大采高综采支架与顶板稳定性研究[D].徐州:中国矿业大学,2010.
    [5] 张煜潇,王开.大倾角特厚煤层综放开采采场顶板破断特征[J].煤矿安全,2014(7):187-191.
    [6] 张春雷.大倾角工作面回风巷破碎煤顶板注浆加固技术[J].煤矿安全,2014,45(10):65-67.
    [7] 伍永平,解盘石,任世广.大倾角煤层开采围岩空间非对称结构特征分析[J].煤炭学报,2010,35(2):182.
    [8] 伍永平.大倾角煤层机械化开采的关键技术与对策[J].矿山压力与顶板管理,2002(1):60-63.
    [9] 解盘石,伍永平,王红伟,等.大倾角煤层长壁开采覆岩空间活动规律研究[J].煤炭科学技术,2012,40(9):1-5.
    [10] 伍永平.“顶板-支护-底板”系统动态稳定性控制模式[J].煤炭学报,2007,32(4):341-346.
    [11] 伍永平.大倾角煤层开采“顶板-支护-底板”系统稳定性及动力学模型[J].煤炭学报,2004,29(5):527.
    [12] 刘庆林,孟祥瑞,赵光明,等.大倾角综采工作面矿压显现规律研究[J].煤矿安全,2008,39(1):22-24.
    [13] 李小萌,刘斐.大倾角采场覆岩结构及矿压显现特征分析[J].煤炭工程,2016,48(5):80-83.
    [14] 潘卫东,任志成,孔德中,等.大倾角煤层回采巷道的矿山压力研究[J].煤矿安全,2014,45(3):35-37.
    [15] 孔德中,潘卫东,王兆会,等.大倾角综采工作面支架稳定性分析及控制[J].煤矿安全,2014,45(2):188.
计量
  • 文章访问数:  171
  • HTML全文浏览量:  0
  • PDF下载量:  0
  • 被引次数: 0
出版历程
  • 发布日期:  2017-08-19

目录

    /

    返回文章
    返回