“刀把”型工作面矿压显现规律及支架适应性
Mine Pressure Behavior Laws and Support Suitability of"Knife" Style Working Face
-
摘要: 为研究浅埋煤层“刀把”型工作面矿压显现规律及支架适应性情况，采用KJ27液压支架压力在线监测系统和FLAC3D数值模拟对转龙湾煤矿23103首采工作面进行实测、分析。结果表明：23103短工作面初次来压步距为49 m，周期来压步距约为10.6 m，支架动载系数约为1.30；长工作面的初次来压步距约为35.9 m，周期来压步距约为9.54 m，支架动载系数约为1.328；来压期间，工作面中部支架工作阻力较大，机头、机尾处支架工作阻力较小，工作面支架工作阻力大部分位于7 200～10 500 kN之间，支架的额定工作阻力为11 000 kN，因此现有支架可以满足生产需求。Abstract: In order to study mine pressure behavior laws and support suitability situations of "knife" style mining face in shallow seam, we use KJ27 hydraulic pressure support online monitoring system and numerical simulation of FLAC3D to measure and analyze 23103 working face of Zhuanlongwan Coal Mine. The results showed that: the first weighting step distance of 23103 short face is 49 m, the distance of periodic weighting step is about 10.6 m, the factor of bracket dynamic load is about 1.30; first weighting step of long face is about 35.9 m, the distance of periodic weighting step is about 9.54 m, the factor of support dynamic load is about 1.328; during the pressurized period, the working resistance distribution features of the supports would have high resistance at the middle part of the coal mining face and low resistance at the two ends of working face; the support pressure would be concentrated at 7 200 kN to 10 500 kN and the rated pressure is 11 000 kN, so the present supports can meet the production requirements.
-
-
[1] 朱庆华,王继承,马占国.浅埋煤层厚硬顶板与冒落的数值模拟[J].矿山压力与顶板管理,2004,21(4):17-19. [2] 王国旺,高登彦.厚基岩浅埋煤层大采高工作面矿压显现规律分析[J].煤炭科学技术,2010,38(7):27. [3] 黄庆享.浅埋煤层长壁开采顶板结构及岩层控制研究[M].徐州:中国矿业大学出版社,2000. [4] 宋选民,顾铁凤.浅埋煤层大采高工作面长度增加对矿压显现的影响规律研究[J].岩石力学与工程学报,2007,26(12):4007-4012. [5] 高登云,高登彦.大柳塔煤矿薄基岩浅埋煤层工作面矿压规律研究[J].煤炭科学技术,2011,39(12):20. [6] 万峰,张洪清,韩振国.液压支架初撑力与工作面矿压显现关系研究[J].煤炭科学技术,2011,39(6):18. [7] 谭云亮,吴士良.矿山压力与岩层控制[M].北京:煤炭工业出版社,2008. [8] 刘学生.近浅埋煤层顶板破断力学模型研究[J].采矿与安全工程学报,2014,31(2):214-219. [9] 尹希文,朱拴成.浅埋深综放工作面矿压规律及支架工作阻力确定[J].煤炭科学技术,2013,41(5):50．
计量
- 文章访问数: 432
- HTML全文浏览量: 0
- PDF下载量: 0
下载:
