典型电感电路的等效电感值计算方法

The Method of Calculating Equivalent Inductance of Typical Inductance Circuits

摘要: 通过对2种典型电感电路进行理论计算,得到电路的等效电感,通过电路的等效电感及国家标准中的参考曲线得到的最小点燃电流值,与通过试验得到的最小点燃电流进行对比,得出用计算电路等效电感的方法来对电路进行本安评定具有可操作性,从而对电路的本质安全性能进行无试验评价。
- 等效电感 /
- 本安评定 /
- 参考曲线
Abstract: By theoretical calculation of two typical inductance circuits,the equivalent inductance of circuit is achieved.Comparing the minimum igniting current gained from the equivalent inductance of circuit and the national standard reference curves with the current that is gained through experiment,it is operable to intrinsically evaluate the circuit by calculating the equivalent inductance of current.So the circuits can be assessed by non-test.
- equivalent inductance /
- intrinsic safe evaluation /
- reference curves

[1]	国家质量技术监督局.GB3836.4-2010《爆炸性环境第4部分由本质安全型“i”保护的设备》[S].北京:中国标准出版社,2010.
[2]	孟庆海,牟龙华.电路本质安全性能计算机分析方法[J].西安科技大学学报,2004(12).
[3]	章良海,宋雅亭,刘小周.安全火花原理及应用[M].北京:煤炭工业出版社,1984.
[4]	B.C.柯拉夫钦克.安全火花电路[M].张丙军,译.北京:煤炭工业出版社,1981.