高预应力锚杆的加固拱理论数值模拟

Numerical Simulation of Reinforcement Arch Theory of High Pre-stress Anchor Bolt

摘要: 为研究高预应力锚杆的加固拱理论，运用数值模拟，分析了高预应力端锚锚杆在矩形煤巷中预应力扩散规律，发现支护形成的压应力主要集中在锚杆尾部，而非两端，并推导出锚杆尾部形成的加固拱厚度与锚杆长度的近似关系。最后模拟了保德煤矿现行锚杆支护的作用机理及效果，验证了锚杆尾部加固拱的存在及其作用效果。
- 高预应力锚杆 /
- 预应力扩散 /
- 数值模拟 /
- 加固拱
Abstract: To research reinforcement arch theory of high prestress anchor bolt, we used numerical simulation to analyze prestress diffusion of the high prestressed end anchorage of the anchor bolt in rectangle coal roadway, and found that the distribution of compressive stress mainly formed in the anchor tail formation, rather than the ends, and deduced the approximate relationship arch reinforcement thickness formed in the anchor tail formation with the bolt length, simulated the mechanism and effect of the existing bolt support of Baode Coal Mine, which verified the existence of reinforcing arch at the bolt tail and its effect.
- high prestress anchor bolt /
- prestress diffusion /
- numerical simulation /
- reinforcement arch

[1]	陆士良，汤雷，杨新安.锚杆锚固力与锚固技术[M].北京：煤炭工业出版社,1998:35-37.
[2]	康红普,姜铁明,高富强. 预应力在锚杆支护中的作用[J].煤炭学报,2007(7):680-685.
[3]	蔡美峰，何满潮，刘东燕.岩石力学与工程[M].北京：科学出版社，2002: 219-221.
[4]	刘永谦. 围压恢复加固理论分析研究及应用[C] //鲁冀晋琼粤川辽七省金属（冶金）学会第十九届矿山学术交流会论文集:采矿技术卷.济南：山东金属学会,2012.
[5]	康红普,姜铁明,高富强.预应力锚杆支护参数的设计[J].煤炭学报,2008(7):721-726.
[6]	杨超,都海龙,边强.支护阻力对软岩巷道围岩变形控制作用的研究[J].矿山压力与顶板管理,2003(2):47-49,118.
[7]	杨圣奇,苏承东,徐卫亚.大理岩常规三轴压缩下强度和变形特性的试验研究[J].岩土力学,2005(3):475-478.
[8]	刘爱卿,鞠文君.预应力全长锚固锚杆抗剪作用分析[J].煤矿开采,2012(1):45-48.