矿用红外线甲烷传感器压力补偿方法

Pressure Compensation Method for Mine-used Infrared Methane Sensor

摘要: 利用红外线检测煤矿井下气体中甲烷的含量,其检测精度受到井下环境压力因素的影响。为提高其检测精度,以甲烷气体为例,研究压力补偿数学模型;在硬件电路上通过大气压力传感器与单片机相结合实现压力的采集、分析及数值计算。
- 红外吸收 /
- 压力补偿 /
- 数据处理 /
- 数学模型 /
- 迭代
Abstract: The accuracy, by using infrared ray to detect methane content of coal mine gas, is affected by pressure in coal mine environment. In this article, a pressure compensation mathematic model is proposed. Taking methane as an example, in order to enhance detection accuracy, the acquisition, analysis and calculation of pressure data are carried out by combination of atmospheric pressure sensor and MCU on hardware circuit level.
- infrared absorption /
- pressure compensation /
- data processing /
- mathematic model /
- iteration

[1]	张立萍,张帆.红外甲烷传感器的实时温度校正模型的建立[J].煤矿安全,2005(7).
[2]	程楷文,刘永平.法国防爆型红外CO2检测仪的剖析[J].煤炭科学技术,1997(3).
[3]	兰天. 煤矿智能红外甲烷传感系统的设计与实现[D].成都: 电子科技大学,2011.
[4]	杨宝霖. 矿用红外瓦斯传感器原理与实现[D].西安: 西安电子科技大学,2007.
[5]	陈世海,张申,牛光东,等.基于MSP430的红外瓦斯检测仪设计[J].煤矿机电,2006(4).
[6]	康永济.红外线气体分析器[M].北京:化学工业出版社,1993.
[7]	刘炎,张立斌,蒋泽.具有温度及压力补偿的矿用红外甲烷传感器设计[J].工矿自动化,2012(8).
[8]	郭瑞,常勇.红外甲烷传感器非线性动态补偿的研究[J].传感器与微系统,2011(8).