山体赋存煤层群合理开采顺序
The Reasonable Mining Sequence of the Coal Seam Group in Mountain
-
摘要: 根据贵州松和煤矿的具体地质条件,从技术、安全、经济因素等方面综合考虑,得到可行的开采顺序方案,采用UDEC数值模拟和构建多目标分析模型进行了优化比较,得出了不同的开采顺序其顶板内的应力集中程度和顶板下沉量是不同的,并优化确定了合理的煤层开采顺序,即依次开采3#、9#、6#、4#煤层能够保证顶板应力场在较低的范围,不出现较为强烈的矿压显现。Abstract: Based on the geological conditions of Songhe Coal Mine in Guizhou province, comprehensive consideration from the technical, safety, economic factors, the study designed the proper mining sequence for the coal mine. Numerical simulation with UDEC software and building a multi-objective analysis model is use to compare the different programs, and found the stress concentration of the coal seam roof and roof vertical displacement is different with different mining sequence, and the study optimized the reasonable coal seam mining sequence, and analysis showed the stress concentration of the coal seam roof in a low range with the mining sequence of 3#,6#,9#,4#,and the pressure behavior phenomenon was not strong.
-
Keywords:
- coal seam group /
- mining sequence /
- numerical stimulation /
- stress concentration /
- target model
-
-
[1] 严国超,胡耀青,送选民,等. 极近距离薄煤层群联合开采常规错距理论与物理模拟[J].岩石力学与工程学报, 2009,28(3):591-597. [2] 马立强,汪理全,张东升,等. 近距离煤层群上行开采可行性研究与工程应用[J].湖南科技大学学报:自然科学版,2007,22(4):1-5. [3] 张勇,刘传安,张西斌. 煤层群上行开采对上覆煤层运移的影响[J].煤炭学报,2011,36(12):1990-1995. [4] 韩军,张宏伟,张普田. 开滦矿区近距离煤层群上行开采可行性研究[J].煤炭科学技术,2011, 39(10): 14-17. [5] 戴文战. 一种多目标决策模型及其应用[J].控制与决策, 2000,15(2):197-200.
计量
- 文章访问数: 517
- HTML全文浏览量: 0
- PDF下载量: 0