高风速综采面采煤机产尘运移规律及防治技术

Dust Migration Law and Control Techniques for Shearer in High-speed Wind Working face

摘要: 在分析采煤机割煤产尘特点的基础上，根据两相流理论建立采煤工作面粉尘运移的离散相数学模型，设定不同的边界条件，得到不同巷道风速情况下采煤机逆风割煤时前滚筒垮落产尘时粉尘浓度的分布，并分析得到高风速综采面采煤机产尘的运移规律。据此有针对性的开展采煤机含尘气流控制及喷雾降尘技术的研究，并在实验工作面进行现场应用，结果表明，降尘效率可以达到90%。
- 高风速 /
- 粉尘治理 /
- 运移规律 /
- 数值模拟 /
- 含尘气流控制
Abstract: Based on the characteristic analysis of dust generated in the process of coal cutting and the theory of two-phase flow theory, discrete phase model of dust transport at mining face was established, and different boundary conditions were set, the dust concentration distribution law was obtained in different wind speed when shearer cut coal against the wind, and migration law of dust generated in high wind at mechanized mining face is achieved. Then the dusty airflow control technology and dust spray technology were researched for the shearer, finally those technologies were used in the working face, and the dust suppression efficiency can reach 90%.
- high speed wind /
- dust control /
- migration law /
- numerical simulation /
- dusty airflow control

[1]	高树云, 周刚. 综放工作面粉尘流场数值模拟及液压支架喷雾优选设计[J].矿山环境地质灾害研究，2009，10（2）：439-442.
[2]	杨胜来. 综采工作面粉尘运移和粉尘浓度三维分布的数值模拟研究[J].中国安全科学学报，2001，11（4）：61-64.
[3]	刘毅, 蒋仲安, 蔡卫，等. 综采工作面粉尘运动规律的数值模拟[J].北京科技大学学报，2007，29（4）：351.
[4]	王福军. 计算流体动力学分析[M].北京:清华大学出版社，2004.
[5]	王涛, 张小涛, 程子华，等. 高瓦斯松软煤层综采工作面粉尘综合防治[J].矿业安全与环保，2009，36（4）：63-64.