提高巷道风量测定精度的最大风速法

The Maximum Wind Speed Method to Improve Determination Accuracy of Roadway Air Volum

摘要: 采用测定巷道中心最大风速的方法获得巷道平均风量，首先推导出巷道最大风速与巷道平均风量的相关关系，给出了风速分布系数的测定与计算方法、适用范围。使用该方法测风可提高测风的速度与精度，减少测风误差，还可将风速传感器获得的风速直接转化成风量，实现对矿井风量的监测监控。
- 风速分布系数 /
- 校正曲线 /
- 最大风速 /
- 巷道风量测定
Abstract: In this paper, it obtained roadway average air volume by using the determination method of roadway center maximum wind speed. First, it deduced the correlation of maximum wind speed and roadway average wind volume, then gave determination, calculation method and applicable scope of wind speed distribution coefficient. This method could improve the speed and accuracy of wind measurement, reduced measurement error, the wind speed obtained from wind speed sensor was also directly converted into air volume, which realized the monitoring and control of mine air volume.
- wind speed distribution coefficient /
- calibration curve /
- maximum wind speed /
- roadway air volume determination

[1]	严彦,许昌,刘德有,等.测风数据的时间间隔对风速概率分布参数计算的影响[J].可再生能源，2011,29(6):24-28.
[2]	张惠军，李喆.工作场所管道通风的测量[J].中国安全生产科学技术，2010,6(3):176-180.
[3]	刘殿武.用速度场系数简化风速测量方法[J].煤矿安全,2005,36(5):42-60.
[4]	姚德.煤矿井巷测风方法的改进[J].煤炭技术,2007,26(10):12-13.
[5]	暨朝颂.完全发展的管流中紊流速度分布函数研究[J].中国矿山工程,2007,36(3):48-50.
[6]	张国枢.通风安全学[M].徐州:中国矿业大学出版社,2007:37-52.
[7]	韩文东,张居仁.矿井测风工（初级、中级、高级）[M].北京:煤炭工业出版社,2010:111-211.
[8]	李玉柱,苑明顺.流体力学[M].北京:高等教育出版社,2008:118-141.