基于正交试验的煤层卸压钻孔参数优化分析

    The Parameter Optimization Analysis of Borehole Pressure Relief in Coal Seam Based on Orthogonal Test

    • 摘要: 钻孔卸压是防治冲击矿压的一种有效卸压措施。卸压效果主要受钻孔孔深、孔径、布置角度及其组合方式的影响。在正交试验设计基础上进行数值模拟研究,并对模拟结果进行多指标综合平衡分析,得出了钻孔深度、孔径及布置角度对卸压效果的影响规律,并选取孔径为133 mm,上下2排钻孔的角度分别为15°和8°,孔深30 m和60 m交错卸压的组合卸压方式,结果符合现场工程的实际情况。

       

      Abstract: The borehole pressure relief is one of the pressure-relieving methods of rock burst prevention. The results of borehole pressure relief are under the impact of borehole depth, borehole diameter, borehole angle and its collocation. The paper makes numerical simulation study based on orthogonal test design and analyzes the simulation results with multi-parameter and equilibrium theory. And then the paper obtains the influence principles of borehole depth, borehole diameter and borehole angle on borehole pressure relief. The borehole with 133 mm diameter and the angle of up-borehole and low-borehole with 15 and 8 respectively have good effects. These results correspond with local mining condition.

       

    /

    返回文章
    返回